Cars & Trucks Logo

Related Topics:

Posted on Sep 11, 2010

2008 Chevy Avalanche - 3 door locks not working, is it possible 3 solenoids are out?

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jul 30, 2009

SOURCE: 2003 Chevy Avalanche rear doors won't lock automatically

The rear doors will not lock with the keyless remote, the drivers master switch

Ad

Anonymous

  • 1986 Answers
  • Posted on Sep 09, 2009

SOURCE: 2003 CHEVY AVALANCHE dash board telling me left

check the lil switch that'll be located on the latch anchor point or within a few inches of it.... odd is the switch is faulty

Anonymous

  • 3489 Answers
  • Posted on Dec 02, 2009

SOURCE: 08 avalanche pass side power door lock not working

if you have any knowledge of automotivce electrical, (and that you need to use a "circuit tester" and not a test light) test for power when someone presses the button. it wouldnt be uncommon for most vehicles for the lock actuator/solenoid/duty actuator to wear out, get weak and fail. this is most probable. given that this is an 08, have you checked withe dealer to see if its still under warranty. if we are only talking a few miles and they wont do anything, look in your owners handbook and get the 1 800 number and get GM's customer service involved. cheers.

Anonymous

  • 236 Answers
  • Posted on Dec 16, 2009

SOURCE: 2008 avalanche 3 door locks not working started

each door has there own door lock solenoid, the only thing they have in common is one fuse, either they all work or none of them will work. So I would say the door lock actuator inside the door has failed.

Anonymous

  • 181 Answers
  • Posted on Mar 09, 2010

SOURCE: 2008 chevy malibu. how to program keyless entry remote

You must take it to the Chevy dealer.

Testimonial: "thank you"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4helpful
1answer

Power door lock on chevy equinox does not work on one door how can it be fixed

I had the same problem but on the passenger side door. The wire harness on the passenger side had broken wires. Purple wire was for the lock and thicker blue and darker grey was power for the windows. I used butt connectors to repair and it worked like a charm. Area was tight to work in between vehicle frame and door. Was easier to remove door panel and disconnect harness at vehicle frame and pull harness through door to complete the repair.
0helpful
1answer
1helpful
3answers

Where are the door lock relays in the 2008 Avalanche?

FUSE AND RELAYS FOR POWER DOOR LOCKS SHOULD BE UNDER THE HOOD.LOOK IN OWNER MANUAL FOR RELAYS LOCATION OR LOOK ON FUSE RELAY COVER FOR RELAYS LOCATION..
0helpful
1answer

I have a 2008 Chevy Avalanche with remote door unlock. The keyless remote stopped working on the driver door but still works on all other doors and the tailgate. If I use the key only on the driver door...

Does the switch inside for that door work ? Does the power window work for that door ? Check fuse DDM - 15 amp I/P fuse panel . Do you know where the insturment panel fuse box is located ?
Fuse Block - I/P
Left of the I/P behind the side trim panel
# 4
DDM Fuse
15A
Driver Door Module (DDM)

Do you know anything about automotive electronic's , control module's ? Serial data communication networks ?
Circuit/System Description
The driver and passenger door lock and side window switches are integrated control module switch assemblies. The DDS and PDS door lock switches are normally open, 2 position rocker type switches, with detents for lock and unlock. The DDS and PDS are directly connected to the respective door lock actuator through the door lock actuator control circuits. When a door lock or unlock function is activated from the DDS or PDS, a serial data message lock or unlock command is sent to the other door switch and body control module.
2helpful
1answer

Good afternoon....what would cause my 2008 Chevy

It could be the power lock motor. You could have a short or bad wiring harness. Might just be a fuse that connects to both. But since you said it's only the driver side. When the power lock motor is bad it can trigger your alarm because they're wired together.

Hope that helps. Good luck.
3helpful
1answer

2008 avalanche 3 door locks not working started with front passenger now both driver front and rear won't open or lock.

each door has there own door lock solenoid, the only thing they have in common is one fuse, either they all work or none of them will work. So I would say the door lock actuator inside the door has failed.
0helpful
1answer

2007 chevy avalanche electrical issues

You need to remove the carpet on the passengers side and check the wireing harness,take off the tape and visually inspect it.You are likely to find broken splices ,bare wires or wires shorted to each other or to ground.
0helpful
1answer

08 avalanche pass side power door lock not working

if you have any knowledge of automotivce electrical, (and that you need to use a "circuit tester" and not a test light) test for power when someone presses the button. it wouldnt be uncommon for most vehicles for the lock actuator/solenoid/duty actuator to wear out, get weak and fail. this is most probable. given that this is an 08, have you checked withe dealer to see if its still under warranty. if we are only talking a few miles and they wont do anything, look in your owners handbook and get the 1 800 number and get GM's customer service involved. cheers.
7helpful
1answer

2003 Chevy Avalanche rear doors won't lock automatically

The rear doors will not lock with the keyless remote, the drivers master switch
Not finding what you are looking for?

314 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...