Question about 2002 Hyundai Accent
What the mechanic is telling you makes no sense. Do not let that guy work on the car. Have it towed to a reputable shop.
Posted on Aug 09, 2017
If not starting U have either a fuel delivery issue or a no spark situation. Open a fuel delivery joint by the engine and turn on the ignition. If fuel squirts out the pump is fine and the hassle is with the spark. Could be bad igniter causing either no spark or a weak one.
Posted on Aug 09, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If, when you switch the ignition on, you get a dash light on, the symbol is a car with a key overlaid, you have somehow activated the immobilser You could try disconnecting and reconnecting the battery, this may reset the immobiliser, If this does not work you will have to contact a Hyundai dealer to get the immobiliser unlock code.
Posted on May 23, 2009
its the camshaft position sensor . Its located (atleast on my 1.6L) to the right of the front HOT plate the conection runs between the engine and the right side fan. easier to work on if you take off the air intake thats by the left front side of the battery. you will be working between the fan and the motor. only one bolt but is tricky so u need a 1/4 inch nuckle with a 1/4 extention. once located and you have the right tools it will only take 30 minutes to replace....dont forget to take off negative battery cable before you start.
Posted on May 07, 2009
SOURCE: Changing Camshaft seal
Install the camshaft after lubricating the journal of the camshaft with engine oil.
Install the camshaft bearing caps.
3. Install the ignition coil. 4. Install the rocker arm and rocker arm shaft. Refer to "Rocker Arms and Rocker Arm Shafts" section. 5. Using special tools, Camshaft Oil Seal Installer (09221-21000), press fit the camshaft oil seal. Be sure to apply engine oil to the external surface of the oil seal. Insert the oil seal along the camshaft front end and install by driving the installer with a hammer until the oil seal is pulley seated. 6. Install the camshaft sprocket and tighten the bolts to the specified torque.
Posted on Jun 02, 2009
Call your local National Guard Armory, Fire Station, State College auto program or High School Auto Shop and ask if they have somebody that would come put it on for you. Ask you pastor who the "auto guy" in the church is, if you don't have a church call the biggest church closest to you and ask the receptionist if they have an "auto guy" that would help you. The local senior center or VFW hall have "auto guys" . If you were within 50 miles of 83501 I'd come do it for you.
Removal & Installation Raise and support the vehicle.
Remove the engine splash shield.
It's O.K. to ask for some help.
Posted on Jun 09, 2009
Tips for a great answer:
Nov 15, 2013 | 2002 Hyundai Accent GL
Sep 06, 2012 | Cars & Trucks
Aug 19, 2012 | 2003 Hyundai Accent
Mar 19, 2012 | Hyundai Accent Cars & Trucks
Sep 22, 2011 | 2002 Hyundai Accent
Nov 28, 2010 | 2002 Hyundai Accent
Nov 19, 2010 | 2002 Hyundai Accent
Aug 10, 2009 | 2002 Hyundai Accent
Jun 03, 2009 | 2002 Hyundai Accent
Oct 08, 2008 | 2002 Hyundai Accent
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: