My radio face is reading "CODE" what should I do my radio isn't working?

for your radio there should be a very very small hole on the front if it is a detatable face it will be behind the face take a thumb tack and insert it in the hole that will reset the radio as for the check engine light you will need a OBD 2 code reader they range from $60-$200 or if you can borrow one it will tell you what the engine code is

you have to go to a mitsubishi dealer in your area, report your problem, supply in VIN number, and the dealer will call the appropriate people to get your radio code. They should have your code within a week and it will cost anywhere from $25-$45 to get the code. I know....sounds silly to have to pay for your own code, but thats just how it works. Happened to me. I removed my battery for more than a certain amount of time and it resets all radio functions, code necessary to power back on.

Hope this helps!!!!

I'm already faced this problem and got my solution from here. Hope it will help you to solve yours too. Here is the link for your Solution " bit.ly/fixyablog-post17762 " (Copy this link on your browser and read the instruction) I'm already faced this problem and got my solution from here. Hope it will help you to solve yours too. Here is the link for your Solution " bit.ly/fixyablog-post17762 " (Copy this link on your browser and read the instruction)

IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of Audi radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

You need to pull the radio far enough out of the dash so you can read the serial number. The radio may be held in by two special 5-sided cup head screws beneath little doors in the radio face. If so, you can buy that tool on line, or you may get lucky and be able to loosen the screws with some other sharp tool.
If your dealer wants money to look up the serial number and get the code for you, try another dealer. I got my code for free from Niello BMW in Sacramento. (great dealer)

need radio chassis number to generate the code ,or ask the dealer

you need to go to the dealer they will unlock it please read your owners manual about this hope this helps

The radio will have to be removed from the dashboard.

Then post the radio make+model plus all the letters+numbers on any labels,barcodes or engraved in the metal casing.

check your drivers manual. it should say in there.

go to dealer,only hope for a factory radio unless you want to replace it with an aftermarket headunit