2005 dodge stratus timing mark alignment diagram

Check for vacuum leaks around the intake
and all vacuum hoses the idal control. Mn

Here (Google is your friend)
http://ww2.justanswer.com/uploads/brownjeff/2010-02-18_155717_1.gif

On this website you find fuse box diagram and description for Dodge Stratus (2005 - 2006)

Dodge Stratus 2005 2006 fuse box diagram

1. Remove the timing belt.
   

   Crankshaft and camshaft timing marks-2.4L engine
   

   Timing belt tensioner-2.4L engine
   

   Camshaft sprocket alignment-2.4L engine
   

   Timing belt installation-2.4L engine
   

   Timing belt tension adjustment-2.4L engine
   

   Timing belt tension verification-2.4L engine
   
   

It doesn't have timing marks as the timing cannot be adjusted. The timing on the Stratus is computer controlled via the cam and the crank sensors.If you look closely you will see you have a DIS (Distributorless Ignition System).

Click on the following direct, free Link. It has the Timing Belt + Mark Diagrams for your 2005 Dodge Stratus (with the unspecified: SOHC (Coupe) and DOHC (Sedan)) 2.4L In-Line 4-Cylinder Engine. Is also has additional - very helpful Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2005/make/dodge/model/stratus/2005_dodge_stratus_timing_belt_diagram_marks.htm

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Dodge Stratus. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/dodge/model/stratus/1996_dodge_stratus_timing_belt_diagram_marks.htm

how i can to find mark timing intrepid 2003 engine 2.7 v6

these don't have timing marks, because you can't adjust timing!!
timing is computer controlled via the cam sensor and crank sensor!!!
if you look closely you will see you have a DIS (Distributorless Ignition System) system !!!

check your distributor position,double
check all marks again,make sure when u line up
the crank marks at #1 cyl. at compression and cam shaft marks!!

G