2000 Chrysler Cirrus Logo
Posted on Sep 03, 2010

How to replace water pump on 2000 Chrysler Cirrus

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Contributor 34 Answers
  • Posted on Oct 06, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Sep 11, 2009
Answers
34
Questions
0
Helped
18736
Points
78

In short, to replace the water pump you need to disassemble a good deal of the passenger side of the engine. Without a lift, this is not a easy job at home. If you really want to do it yourself, I highly recommend you get a Haynes manual for the car. It's invaluable for a large job like this. Just be prepared for a long job. The shop manual for this calls for 5.5 hrs. That's a mechanic with experience, a lift, and all the right tools. One huge suggestion for you though. Replace the timing belt while you are in there. Its a cheap part, and honestly it'll fail someday. This will save you another headache's worth of labor for one little part.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
1answer

Show me a picture of the water pump on a 2000 Chrysler Cirrus LXI

The pump is part of the timing components. You only want to do this one time. So replace all the timing components. You don't have to replace the crank or cam gears.
0helpful
1answer

What does the book say in hours to replace the timing / water pump on a 1997 chysler cirrus 2.5 v6 ? Or in your opinion what's a fair price to have this done by private person coming to the house .

Replacing Chrysler 2.2 and 2.5 liter engine timing belts

www.allpar.com/fix/timing-belt-22.html
Replacing the timing belts on Chrysler and Dodge 2.2 and 2.5 liter ... Then loosen the bolts on the crankshaft pulley and the water pump pulley so they will be ...

HOW TO PUT WATER PUMP ON - 1997 Chrysler Cirrus

repairpal.com > Questions > Chrysler > Cirrus > 1997 Chrysler Cirrus
Jul 4, 2010 - WATER PUMP WANT HOLD WATER LONG AND NOW IS MAKING A ...If you change the water pump,you need to also change the timing belt ...

Timing belt - 1995 Chrysler Cirrus - RepairPal


0helpful
1answer

2000 cirrus is leaking rad fluid somewhere,radiator is not leaking

check your hoses, water pump heater core radiator cap, if car has been overheated, check exhaust for steam and smell of coolant, check oil make sure it is not milky, last 2 are symptoms of blown head gasket
0helpful
2answers

My 2000 chrysler cirrus had a small undetectable water leak. My mechanic 1st said it was the freeze plugs rusted, then he replaced the radiator cap, thermostat, and gasket seal. I drove it 20 miles and...

sounds like a snow job
should have pressure tested the system on the hoist and all leaks fixed the first time round
the cap , thermostat and whatever gasket that was replaced was not necessary as the cap and thermostat would not be the leak
ask what the long tube is for as radiator and heater hoses can be got from a local parts shop or dealer spares
next time use accredited service centers and get a better job done cheaper
0helpful
1answer

Have a 2000 Chrysler cirrus LXI 6. Just had the timing belt replaced 4 days ago and now its starting to overheat. It only gets hot when im sitting still. but goes down while driving (assuming its the...

sounds like the cooling fan(s) are not working. possible a disconnected plug near radiator . my guess is the mech forgot to plug it back in. check around the radiator for any plugs that are just hanging loose . also check the fuses . there may be one for cooling fan and see if it is burned out.
0helpful
1answer

Steering is really stiff after replacing power steering pump on 2000 chrysler cirrus??

Is the drive belt adjusted properly. Did you bleed all air from the system after installing the pump? Start the engine and turn the steering wheel from left to right fully 10 times. This will remove any trapped air. Check the fluid level and top it off.
0helpful
1answer

My 98 chrysler cirrus is lesking water and im told

First open the hood of your car and check where the leak is coming. Thermostat gasket is one source but
it could also come the radiator, radiator hose, or the
water pump. Check all these items, and you can do
the repairs by replacing the defective parts. Except for
water pump that really needs a mechanic to replace the
bearings and the mechanical shaft seal.
0helpful
1answer

How to replace fuel pump on 95 chrysler cirrus.Need detailed instructions on how to remove and replace fuel pump module on 1995 Chrysler cirrus.

to detailed to explain here. buy a hanynes repair manual at local auto store, 17$ it'll explain step by step.
Not finding what you are looking for?

2,099 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...