At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Cd player not working takes a long time to load, then...
If this happens using all your CD, you may want to try a cleaner disc inserted to the cd player. It may be just a dirty disc. If that does not work, it could be a faulty device.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Car CD Players get dusty from road grime. Buy a CD Cleaning Disc and run it is a couple of times. The laser that reads the tracks is much lower power, and if it can't read the whole tracking system, it ejects the CD. The cleaning disc has little brushes that cleans the optic lenses.
its busted,
you have only 2 choices. (or 3 )
1: take it in.
2: take it out and then take it to any ET service tech center.
3: take it out, and open it and unjam it. (look for debris, and broken parts inside, clean it.
me? id do 4 th, id ignore it and use, my USB stick, (no moving parts)
I had the error code no. 1 in my 2007 Toyota Camry Hybrid. It has the CD radio unit with JBL system. It will not eject the CD, or play it. I removed the entire radio/CD unit and replaced it with a used excellent unit bought off of ebay for $100, and the replacement works fine. However the replacement is also 7 years old. Therefore I would not be surprised if it failed again. Prior to the error 1 I had intermittent error 3 codes, which had the same effect: no playing of the CD, unable to eject, and unable to insert other CDs. Sometimes the error codes would go away, and the function would be normal. But once it started, I think it was on a downhill path. A new replacement is nearly $2000. Used are about $100 to $200 or more depending on the seller and condition of the unit. Youtube has videos on how to replace the unit which only requires simple tools: it is not difficult but takes about 45 minutes to an hour. If you do it you have to put the car in gear to move the gear shift gate, which requires the car to be on, so you should have the parking brake on for safety. One alternative is to send your unit to a repair company but that might cost more than simply replacing the unit. Good luck!
you must check the wiring it looks like some wire are damaged their connection to check the wiring you need the wiring diagram which will help you to locate the problem go to the given link you can get the diagram from the link it's a safe and secure link http://toolsnyou.com/
because its still a new car try go back to the dealer, they often keep spares and sometimes are kind enough to give them to you, other times you need to buy it off them can cost up to $40 from them but they can definately supply them to you
you may have to use needle nose pliers to pull them out or remove the radio and open it up and remove them also take a look at the drive belt it may have broke, there are many electrionic places that will repair it if you remove it and take it to them, most of the one i run into broke a belt or 2cds were jamed inside it.
Get a cd disc with a built in head cleaner and run it through the cd unit. It may work for you. If not it will have to be removed and serviced at a dealer
×