Low beams wont work on 1990 camry changed globes checked fuses, changed head lamp relay . switch seems fine , I was playing with the head lamp realy and it seemed they worked, and the next day they didnt so i have replaced relay still no go and i cant get high beam now unless i pull indicator back towards me to flash high beams , with indicator pushed forward in its traditional constant high beam this function will not work as i did previously either, so no high or low beams now can you help

SOURCE: Headlight 2004 camry

your module in the steering wheel is faulty you should get it replaced. you can purchase it at ie Napa for alot less than through a dealer.

SOURCE: No Hi Beam on 93 Camry

The headlamp circuit is rather simple. From the 15 amp RH headlamp fuse, there is a red w/yellow trace that goes to the RH high beam. Out of the 15 amp LH headlamp fuse, the wire going to the LH Hi beam is solid red. Both of these wires should have power when the headlamp relay is energized. The wires from the Hi Beam bulbs going back to the switch should both be red w/black trace. The wire going from the headlamp relay to power the 2 15 amp fuses is white. The headlamp switch applies a ground to illuminate either the Lo Beams or the Hi Beams.

SOURCE: low beam headlights on 2004

You may have replaced the high beam by mistake. The low beam is closer to the exterior (the sides of the car)
Paul G Schmidt
[email protected]

SOURCE: headlights wont turn on but high beams do on my camry

Have you tried new bulbs, its rare but both low beams may have blown at the same time, it has happened to me in the past.
I don't know your car but the high and low beams could be fused separately so you are left with at least one set in an emergency.

SOURCE: my high beams dont work.

high beam switch is faulty look at getting a new stalk.....