The seat track you need will have to either need power or be aligned so you can reach its' mounting bolts too. You will be able to see how the gear drive is attached on the replacement seat track. You may be able to unbolt the gear drive from the track on your damaged part. Then the seat should slide either way without the drive gears stopping you from moving the seat. Sometimes there is only room for a air ratchet to fit as the bolt can spin without having to move the ratchet handle.
SOURCE: power front seat won't go back and forth
U will have to replace the entire power seat transmission, there is no other way to get the part, I know it sucks but that is the way it is, try finding a used unit, or swap the passenger side to the drivers side.
SOURCE: cannot access rear bolts as power seat stuck in
Bolts should go through the floor with a nut underneath the car. No need to try to access from inside.
SOURCE: trying to remove rear seat
the seat belts i dont think so the others yes then as you push in on the seat lift to unlock from the top hangers
377 views
Usually answered in minutes!
×