2004 Nissan 350Z Logo

Related Topics:

Posted on Aug 27, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Low beams on 2004 350z does not work. could it be a blown fuse, if so where is the fuse located?

1 Answer

Mike

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Nissan Master 4,383 Answers
  • Posted on Aug 27, 2010
Mike
Nissan Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 07, 2009
Answers
4383
Questions
1
Helped
1260605
Points
17064

Typically, the bulbs are burned out. check for power at the lights....Often one light burns out, and you fail to notice it, then the 2nd one burns out and mislead you to think something in the supply is at fault....

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2008 mitsubishi nativa. Or montero sport low beam fuse11@30A draining my battery

The low beam fuse in a 2008 Mitsubishi Nativa or Montero Sport is located in the fuse box under the hood. The fuse box is labeled with a diagram of the different fuses and their corresponding amperage ratings. The low beam fuse is typically labeled as "F11" or "11" and has an amperage rating of 30. If the low beam fuse is blown, it will need to be replaced. To do this, you will need to remove the fuse box cover and locate the low beam fuse. The fuse will be a small, plastic tab with a metal strip running through it. The metal strip will be broken if the fuse is blown. To replace the fuse, simply remove the old fuse and insert a new one with the same amperage rating. Be sure to replace the fuse box cover before closing the hood. If the low beam fuse keeps blowing, there may be a problem with the low beam headlights or the wiring. In this case, it is best to take the vehicle to a qualified mechanic for diagnosis and repair. Here are some additional tips for troubleshooting low beam headlight problems: Check the headlight bulbs to make sure they are not burned out. Check the headlight wiring for any damage or corrosion. Check the headlight switch to make sure it is working properly. If you have a multi-meter, you can check the voltage at the headlight sockets to make sure there is power getting to the headlights.
0helpful
1answer

Where is the low beam relay switch located

Replace any blown fuses, and check or replace the head light relay.
3helpful
2answers

My low beam headlights do not work as daytime running lights or manually with the headlight knob pulled out . The high beam headlights however do work if I have the knob pulled out all the way with the...

Check out your fuse associate with the low beam headlight, secondly there is a relay fuse under fuse rely box under the hoos. Locate this box, and locate the relay fuse associated to the low beam. You can rotate the relay with another relay of the same spec to see if the low beam lights are coming on. I would believe that it is a fuse that is blown, check your owners manaual on the location of the fuse box. Usually it's located in the driver side kick panel.
2helpful
1answer

I have a 2002 Hyundai Accent the Alternator went out and replaced that and it started just fine acept for the following: The low beams on the head lights work high beams ( but the low beams don't work )...

It sounds like a blown fuse. Are you checking them with a test light? And have you located all of the fuses. there will typically be a fuse box under the drivers dash area, and one under the hood. have another look Im certain you'll find a blown fuse. Good luck.
1helpful
1answer

The dim lights don't work on my 2006 Kia Spectra, but the brights do. What could be the problem?

Assume you're referring to 'low beams' not working? and 'high beams' are? Both circuits run they're own relays and fuses, check owners manual for locations, could be faulty relay (check by swapping with high beam relay) or blown fuse. Also find occasionally, both globes blown, high and low beam filaments in same globe
1helpful
1answer

2005 Dodge caravan. The Headlights are not staying on. When we turn the switch, sometimes they come on, sometimes they do not. It's getting worse.

Hello, on the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights. During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

Thanks
2helpful
1answer

I have a 2005 dodge caravan. the headlights have

On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.
0helpful
1answer

Low Beam Lights won't work. High Beam works fine.

hey
id say check your fuses, if the two lights went at once then its more than likely a case of changing the blown fuse. The fuses are located usually under the dash on the drivers side with some also in the engine bay.
good luck
0helpful
1answer

The low beams don't work, could this be a blown fuse, if so where is the fuse?

if low beams and high beams dont work check the fuse.if only the low beam lights dont work.and bulbs good.i am looking at dimmer switch.
6helpful
2answers

The low-beam headlights in my 2005 LaCrosse won't work,but high beams do,What would cause this?

there is a relay in the fuse panel located under the hood its called the HDM RELAY # 34 .
Not finding what you are looking for?

497 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...