- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it Should
but to be safe after all the work to get it in call the Hyundai dealer and ask them what
what interchange year would work on your year and they will tell you
maybe you should weigh your options cause probably cheaper to replace that rebuild disconect bat before you remove starter take all wires loose remembering where they go dont mix up and remove 2 or 3 bolts that hold the starter in place then remove and replace in reverse order
dear friend-rhre is two bots holding the starte on the one enters from the gearbox side and the othe from the starter side that can only be reach from the bottom.
i would tend to think it was electrical possibly the coil they overheat sometimes and will kill the firing feel the coil and the resistor under the coil to see if they are more than just warm if they are that could be the problem
×