Key locked in ingetion and unable to get it out also wipers and cruse control dont work have to unhook the battery to get it to stop when i hook the batery up again the car will automatily start

If the security system is armed, which it can be whenever the battery power is unhooked then hooked up again as the system thinks a theft attempt has been made, try this: Hook up the battery then lock and unlock the driver door using the original key. This will let the system know that you - the owner - have the key and are not trying to steal it. Not a guaranteed fix but works about 90% of the time.

try this 1. turn off car. 2. disconnect battery. 3. put key in the ignition and turn to the run position. 4. hook up battery. 5. now turn key off and back on

Wipers won't turn off......sometimes! - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Diesel > 6.7L Power Stroke Diesel
Feb 3, 2014 - Starting around 25,000 miles my wipers stayed on the slowest intermittent setting even when ... They only two that come to mind is the switch inside the cab or the wiper motor control board. ... The wipers do not park at the correctposition ... It doesn't really matter what steps need to be taken to fix the issue.

Window washer fluid put in window washer won't work now.

www.cargurus.com > Questions > Kia > Sorento

CarGurusAug 31, 2015 - Window washer fluid put in window washer won't work now. ... 4 answers. wipers working, not the washer though, pulled pump, intake screen clean. 2011 Kia Sorento Base ... Interior lights do not work when door is opened 7 answers. At first the back seat overhead light stopped working. Kia said it would ...

Sounds like the deresonator has a crack in it, unhook the battery for a hour system will reset easy replacement. then go to the local auto parts store, check for codes. you probably need camshaft position sensor

2006 2007 Dodge Ram 1500 3500 turn signal wiper switch replacement

click on link

The alarm and the central locking are all part of the remote keying system. You will not fix it with changing fuses because it is likely the ECU needs to be be reset. Unfortunately, it will require a visit to an authorised workshop to do this

the cruse and the wait to start are most likely not related, the systems are not in common and use to completely different control systems.

lets start with the cruse, what we see fail the most is the cruse switch in the steering collum and this is easy to check if you have access to a automotive scanner, all you need to do is run a switch test with the scan tool, if you don't have a scanner then it would be in your best interest to take this problem to a shop.

the wait to start, is because the pass key system in the car did not recognize the key when you stuck it in the key lock cylinder, this could be just a worn key, or it most likely is a worn key lock cylinder, we replace many of them each year so i think i would try a new key first if the paoblem persists then replace the key cylinder.

Try unhooking one of the battery cables and leave it off for at least 20 minutes. When you hook it back up the computers should re-boot. That has solved problems for me with heater, interior lites, power windows, AC, day time running lites, power mirrors, CD player, and wipers on GM autos and S-10 PU and Dodge trucks. None of the switches are connected to the device they control anymore. The switch tells the computer to open the window and the computer send a signal to the window motor. When the computer gets confused strange things will happen or not happen.

what you want to do is take a test light find the electrical plug thats hooked to wiper motor, either unhook it and test the plug with switch and key on or poke in the wires and see if it lights test light, if no light then i would say its switch, if it lights than its wiper motor. I don't know of any relay for wipers.

You probably popped a main fuse somewhere. Check all fuses under hood & dash. Try removing battery cables for a minute or so, in case of resetting breaker involved, just in case.