-
Expert
65 Answers
- Posted on Aug 11, 2010
Re: I need to know step by step on how to set the timing...
- Remove or disconnect the following:
-
Negative battery cable
Accessory drive belt and tensioner
Timing belt cover
Right front wheel
Right inner splash shield
Crankshaft pulley
-
Align the timing marks.
- Removing Timing Belt
- Loosen the timing belt tensioner bolt (1).
- Use an 8mm Allen wrench, and turn the tensioner (2) counterclockwise 1 / 4 turn.
- Insert a 1 / 8 inch drill bit in the hole (3) to lock the belt tensioner in place.
- Remove the timing belt (4).
To Install :
- Install the timing belt in a counterclockwise direction starting at the crankshaft.
- Remove the drill bit to unlock the timing belt tensioner.
- Rotate the crankshaft two complete turns and check that the timing marks align.
- Tighten the tensioner bolt to 15-22 ft. lbs. (20-30 Nm).
- Reinstall or connect the following:
Crankshaft pulley. Tighten the bolt to 81-96 ft. lbs. (110-130 Nm).
Right inner splash shield
Right front wheel
Timing belt cover
Accessory drive belt and tensioner
Negative battery cable
- Start the engine and check for proper operation
×