LOCATION OF THE ECM ON A 1996 CHRYSLER TOWN AND COUNTRY 3.8

Marvin

• 85242 Answers
• Posted on Sep 21, 2010

SOURCE: IOD fuse location in a 1996 Chrysler town and

It's in the fuse box under the hood by the battery. Open the box. It's the one at the front and farthest to the driver's side. Should be a yellow 20 amp fuse. Removing it will kill the radio, navigation and multi disc player.

SOURCE: replacing a brokem mirror on a 1996 chrysler town

directly behind the mirror on the inside of the door there will be a plastic triangular shaped cover
gently remove the cover using your fingers or something flat like a knife blade
once removed you will see a few holes in the metal of the door, in these holes you will see about 3 bolt heads which hold the mirror to the door, also you will see a multi wire block for the mirror wiring
seperate the wiring block and remove the 3 bolts holding the mirror to the door
don't even think about replacing the glass if that is all that is broken as it is a major drama
just buy a complete mirror assembly and fit to the door unless it is colour coded to the paint on the car in which case you will have to have it painted
re assemble in reverse order to disassembly
hope this helps

SOURCE: need the location of the fuel filter fora 1996

It will either be inside the gas tank (real pain) or it'll be in front of the gas tank recessed into the frame.

SOURCE: Describe your 1996 Chrysler Town &

HAVE SOMEONE EXTRACT THE CODE FROM THE CAR'S COMPUTER. IF THERE IS A CHECK ENGINE LIGHT ON THEN THE PCM HAS A CODE STORED ON IT. IT SOUNDS TO ME LIKE A THROTTLE POSITION SENSOR, BUT JUST CHECK THE CODE TO BE SURE. SOME OF THESE CAN ALSO HAVE A BAD IDLE AIR CONTROL VALVE. I HOPE THIS HELPS YOU TO FIND THE PROBLEM. PLEASE KEEP ME POSTED, THANKS FOR USING FIX-YA. GOOD LUCK

SOURCE: need location of crank sensor

You did not mention the engine size you have, but the sensor is mounted on the trans housing and will look like this on a 3.8 liter engine.