At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
How to remove the air breather from the 2002 dodge intrepid to replace the battery ? i cant seem to figure how to remove the air breather box from that plastic/rubber nipple on the corner of the box mount ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This should be located in the power/fuse box under the hood. The box should be located near the battery. Remove the plastic cover on the box and there should be a diagram showing the positions for the relays.
Hi there. The battery cell in this particular vehicle can be a little tricky to locate.You will first need to remove the right front tire. Next; Remove the right front inner fender liner. Once that is completed, you will expose the battery just to the inside of the right wheel fender liner. You can extract the battery at that point. Remember to remove the Neg- black post first, then, the Red+ positive post last.
No. Go to Napa, get the bushing repair kit. Turn the steering wheel all the way to the right. Remove the air inlet tube. Should be 2 7/8" bolts retaining the inner tie rod ends. Loosen both. Remove one at a time, replace bushing with kit. Use some synthetic brake grease on the bushings. I recommend Napa sylglide. Replace the bolt, but do not tighten all the way. Do the other the same way. Tightnen both bolts, reinstall the air inlet tube, get vehicle aligned.
you should only have to remove the plastic filter holder and the hose is right there on top of the motor.the plastic breather/filter cover is the only thing you should have to remove to get to the hose
The alternator and power steering belt should have been removed first, but here is the way to get it off. The belt, the idler is adjustable - loosen locknut on the small pulley above the alternator, at top left of alternator, The bolt on the outside of pulley, behind the pulley top left, is an adjuster bolt, turn til you can slide belt off easily; hoped this helped
×