1997 breeze is shooting codes 12 46 43 55

OBD Code 12 - No Distributor Reference Pulse (Diagnostic Test Active) The Engine Control Module-ECM uses the distributor reference pulse to calculate the engine speed. On newer engines, the Crank Shaft Position Sensor performs this function.

Symptoms:

• When flashing the Check Engine Light to read codes, code 12 will always display first, indicating the diagnostic system is active
  
• The engine will not run with a "hard" code 12 set
  

Common Problems:

• Chances are you will never need to diagnose a code 12. Rather, the problem would be a crank, no-start condition.
• If code 12 does not flash, that would indicate a communication problem with the ECM.
• Code 12 does not show when reading codes with a scan tool. If there is a communication problem, the scan tool will let you know.

OBD Code 46 - Pass-Key II System Error - Circuit out of Frequency Range The ECM receives a signal from the Pass-Key module. When the correct signal is received, the ECM will allow the engine to start and run. Please review the RepairPal article on the GM Pass-Key Anti-theft systems for more information.

Symptoms:

• Engine may not start

Common Problems:

• Faulty ignition lock cylinder

OBD Code 43 - Knock Sensor error The ECM receives a signal from the Knock Sensor based on the amount of engine ping detected. The ECM uses information from this sensor to help calculate fuel delivery and spark timing.

Symptoms:

• Engine ping
• Lack of power

Common Problems:

• Faulty Knock sensor
• Poor connection at Knock sensor

OBD Code 55 - End Test.


Hope ehit help (remember comment and rated this).