How too remove back seat in a 1995 Nissan Maxima

Question 1

0helpful

1answer

Why won't 2000 nissan maxima passenger seat go backward ?

try to look under the seat for coins that have fallen down and got stuck in the track. it happened to mine!

Apr 07, 2013 • 2002 Nissan Maxima

0helpful

1answer

I have a 1995 Nissan Maxima, The light on the dashboard is not turning on and I dont know why. My radio lights also turn off whenever I turn on my headlights. I also have a problem with my security...

my 1995 nissan maxima have a lil miss

Aug 16, 2011 • 1995 Nissan Maxima

1helpful

3answers

How do i take the back off on a 1999 nissan maxima bucket seat

Hi, follow the instruction below......
Rear
See Figures 3, 4, 5 and 6

Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips

Remove upper rear seat back-to-chassis bolts.

Fig. 4: Remove the bolts behind the center armrest ...

Fig. 5: ... and the bolts on the lower corners ...

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat

Remove rear seat back by tilting forward and pulling straight up.

To install:

Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Jan 19, 2011 • 1999 Nissan Maxima

1helpful

1answer

I would like to change spark plugs on my '95 nissan maxima do I have to remove intake manifold?

http://www.ehow.com/how_6523412_replace-spark-plugs-1995-maxima.html
There are the steps to replace the plugs. You shouldn't need to remove the manifold.
Thanks,
Lee

Oct 27, 2010 • 1995 Nissan Maxima

2helpful

1answer

BCM on 1995 nissan maxima where is it located and does it have major role when starting vehicle, the starter is not turning over when key is turn to start position.

i got a 95 maxima it has no power on the inside the windows wont work the seats the blower motor or the radio wont work either done checked all fuses and relays they are good what could it be

Aug 25, 2010 • 1995 Nissan Maxima

0helpful

1answer

Location of fuel filter 1995 Nissan Maxima

This is if it is an internal filter, if it is not you still have to pull the whole bottom of the back seat out and look for the inspection plate.
Relieve the fuel system pressure by first removing the fuel pump fuse. Then, start the engine and allow it to run until it stalls. Crank the engine for 2 to 3 seconds to release the pressure Turn the ignition off.
Step 2 Disconnect the negative battery cable. Remove the rear seat bottom and the inspection hole cover. Disconnect the electrical and quick connectors and remove the six screws. Remove the fuel level sensor unit and the fuel pump assembly. Then, take out the flange and snap fit portion of the fuel pump.
Step 3 Remove the fuel tank temperature sensor harness, the fuel level sensor flange, and the fuel pump connector. Disconnect the quick connectors from the fuel level sensor, and remove the fuel level sensor from the chamber. Take out the fuel filter.
Step 4 Put the new fuel filter in the chamber, followed by the fuel level sensor. Attach the quick connectors to the fuel sensor. Connect the fuel pump connector and put the fuel level sensor flange and fuel tank temperature sensor harness back.
Step 5 Place the fuel pump assembly inside the tank. Replace the screws and electrical connectors. Reattach the quick connectors. Reconnect the negative battery cable.
Step 6 Start your car and check for leaks, and make repairs if necessary. When repairs are complete, replace the inspection hole cover and the rear seat bottom.

Feb 03, 2010 • 1995 Nissan Maxima

1helpful

1answer

Where is the fuel pump located on my 96' nissan maxima,In fuel tank, or on top?

you have to take the back seat out to remove it from the fuel tank. Just removed my fuel tank

Jan 09, 2010 • 1996 Nissan Maxima

0helpful

1answer

Remove alternator 1995 nissan maxima 3.0 fwd

Remove main belt first then remove the bottom and top bolts disconnect the plug on it and remove the other cord on it that runs from the battery.

Nov 24, 2009 • 1995 Nissan Maxima

0helpful

1answer

Getting the back seat out of a 1991 nissan maxima

look behind the arm rest pull the 2 plastic tabs out and remove the 2 10mm bolts

Apr 08, 2009 • 1991 Nissan Maxima

0helpful

1answer

REMOVING MY FRONT SEATS FROM MY 95 NISSAN MAXIMA

There are 4 bolts holding the seat to the floor. 2 in front and 2 in rear. You will need 14mm socket and ratchet or wrench. You will also have to unplug some connectors under the seat, before you take it out of the car.

Jul 17, 2008 • 1995 Nissan Maxima

Question 2

ZJ Limited

Nissan Master 17,989 Answers
Posted on Jul 19, 2010

ZJ Limited

Nissan Master

Joined: Jul 15, 2008

Answers

17989

Questions

0

Helped

14453247

Points

60858

Rear
See Figures 3, 4, 5 and 6

Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.

how too remove back seat in a 1995 Nissan Maxima - 03b6e0a.jpg

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips

Remove upper rear seat back-to-chassis bolts.

Fig. 4: Remove the how too remove back seat in a 1995 Nissan Maxima - a796228.jpgd the center armrest ...

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat

Remove rear seat back by tilting forward and pulling straight up.

To install:

Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Testimonial: "thanks"