Crankshaft Damper/Pulley
counterclockwise to remove pulley:
REMOVAL & INSTALLATION
Fig. 2: The crankshaftBolt on crankshaft to remove clockwise or - 89613g42.gif stationary by using a suitable tool to place between the flywheel teeth
Fig. 5: A puller may be required to remove the crankshaft damper
NOTE: If working on a VE30DE or VQ3Bolt on crankshaft to remove clockwise or - 89613pj2.jpgit would be a good idea to replace the crankshaft oil seal when the crankshaft damper is removed.
Fig. 6: The timing chain cover oil seal shoBolt on crankshaft to remove clockwise or - 89613pj4.jpgced whenever the crankshaft damper is removed; this seal is leaking severely
Fig. 7: This crankshaft damper may have a problem sealing properly due to the groove that was worn into it from the seal
To install:
SOURCE: 1991 Accord 2.2L timing belt replacement
Hi,
yes standard right hand thread,the easiest way is with a very powerful air gun with an impact socket,be warned have had to use an 1 inch drive lorry gun to undo these bolts as have a compression washer under the bolt head,Good luck,
2,221 views
Usually answered in minutes!
on 91 maxima is the bolt removed clockwise
×