At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Where are the radio fuses for my 2006 for mustang gt...even since the car was new the shaker 500 has had issues...the cds get jammed and the cd player says error and wont eject the cd
Re: Where are the radio fuses for my 2006 for mustang...
There could be two fuses that service the radio; one identified as 'Accessories' in the main fuse box and possibly a second in-line fuse inserted in the 12V line and under the dashboard.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You should be able to buy a adapter for the OEM plug in the vehicle player unit to the player unit of your choice.
That is if a butcher has not already been to work on the OEM wiring. Then that is a whole different story.
I removed shaker radio/cd, replaced it with a quality radio no cd changer.
no more drained battery problems.
mustang runs mighty fine, pop in the ipod or listen to satellite radio
You either shorted something during the install of the radio causing the fuse to blow for the window. The other thing, if you put new speakers in the doors then you could have unplugged the switch on the drivers side.
you may have blown an internal fuse on the radio. sometimes radios have an inline fuse on the red wire, located behind the radio. You must remove it to discover this problem though.
Its time for a new deck man, the one in your dash is toast. Once those go out you really cant fix em just replace it. Alpine is always good never had one break on me yet.
Not sure if the Radio is even turning on or what kind you have as there are a couple. Heres the info I can give you though. The radio (start) fuse is in the number 20 position (20 amp) in the fuse box inside the car located on the passenger lower side behind the kick panel. Remove the trim panel and the fuse cover to access the fuses. A diagram for that fuse is below. In power distribution box located in the engine compartment are 3 other fuses depending on which radio you have. in the number 6 & 7 position are the fuses for the rear amps on the shaker 1000 radio and in the number 16 position is for the front amp if you have the shaker 500 radio. All those fuses are 30 amps. See the diagram for that fuse box below as well.
Subject: Radio With Six Disc CD Changer Does Not Recognize Loaded CD And
Displays An "INITIALIZING" Message, CD Will Not Play, CD Cannot Be
Ejected, Or Disc Icon Does Not Illuminate (Reprogram Radio)
Models:
2005-2006 Chevrolet Avalanche, Suburban, Tahoe
2005-2007 Chevrolet Colorado, Express, Silverado Classic, TrailBlazer
2005-2006 GMC Yukon, Yukon XL
2005-2007 GMC Canyon, Envoy, Savana, Sierra Classic
2005-2006 HUMMER H2 with Six Disc CD Changer Equipped Audio System (RPO UC6)
Condition
Some customers may comment on any of the following conditions:
• The CD loaded in the radio will not play.
• The CD loaded in the radio will not eject.
• The disc icon on the radio will not illuminate.
• The radio displays an "INITIALIZING" message for approximately 30 seconds after vehicle start up.
Important: Do not attempt to play CDs with paper labels on them in this
CD player. The labels may warp or wrinkle and jam the CD player
mechanism. Refer to the Compact Disc Care and Cleaning procedure
(Document ID# 1656123) in SI for more information.
Technicians are to reprogram the radio with new operating software using the following procedure:
1. If the radio has a CD(s)2008 General will be necessary to reset the radio and remove them
before the radio is reprogrammed. Remove and reinstall the radio fuse to
reset the radio and then eject the CD(s). If cycling the power to the
radio does not allow the CD(s) to be removed, the radio may have another
failure that will not be corrected by the reprogramming procedure that
follows. Refer to the Diagnostic Starting Point - Entertainment
procedure in SI to begin your diagnosis of this failure to eject CDs
concern before reprogramming the radio.
2. Reprogram the radio using the Service Programming System (SPS) with
the latest software available on TIS2WEB. Refer to the SPS procedures
and the Radio Programming and Set procedure in SI for more information.
As always make sure your Tech 2® is updated with the latest software
version.
3. Verify proper operation of the radio and make sure that all CDs can be ejected.
just replaced my 2006 Pontiac G6 GT Monsoon 6 CD changer with an identical model pulled from a totaled car.How do I reprogram it so it works on my car.
shaker radio
×