How do i remove the window crank handle of a 1993 chevy lumina. I do not see a spring clip

SOURCE: door window handle

There is a butterfly clip that sits in a set of notches on the actual crank handle. you will need something small and long enough., like a mini flat head srewdriver. Push the door surface and turn the crank until you can see the ends of the clip. Now, use your screwdriver to push the clip off the crank handle. It will shoot off so keep an eye on the ground when you get it off. Hope that helps.

SOURCE: 2001 accent how to remove the window handle

push and move it to the front

SOURCE: need to remove window crank 2004 hyundai accent

Your Local Auto Parts Store has the Tool that you need for this Removal. Some of them will let you Rent it instaed of paying the 50.00 Bucks for the Tool.

SOURCE: manual window crank handle-how to remove

There are 2 ways the handle can be attached. One way is there is a cover on the handle that can be popped off and there is a screw holding it on. Or there is a clip on the handle between the handle and the door panel. There is a tool made for this, but it can be done without the tool. If you push in (towards the door) on the door panel and look at the back side of the handle you will see the clip. Simply pop off the clip with a flat blade screwdriver and pull the handle off. To install the handle put the clip back on the handle first and then push the handle onto the shaft. Hope this helps.

SOURCE: Broken plastic rod retainer clip

the clip comes with a new handle and are not available separate.