At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi soundslike the cooling temperature switch is bad its located by the thurmostat houseing its a 2 pin sending unit that tells the pcm how hot your engine is any parts store will have it hope this helped don
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are three temperature sensors on a 95 Previa engine. They are located on the left front side of the engine. The lower one is somwhat accessable from under the vehicle but access to the other two will require removal of the passenger seat and the access cover under the seat.
the longer you run it if the bushing are bad the drive shaft gets more damaged ebay has a set for cheap it takes two one near engine and one behind front Assembly
the last year, your blower resistor has been bad, now your motor is bad. rap on the motor and see if it start to run, if so, replace the motor and the resistor.
The speed sensor on the transmission maybe bad, replace it and see if that is the problem.I had the same problem with my previa and replaced it and it worked great!
Hi ...it could be you need front end work ...does your vehicle have rack pinion steering ...you might have to replace it ?Or have it flushed ..any leaks ? Let me know if this was helpful to you ...might be other things too .... Good luck Joe
Why are you jumping the blower switch? If the issue is the switch is not functioning replace the fan resistor located on the side of the heater box under dash try that first.
The fuse panel is located on TOP of the center of the dash, just above the AC controls. The D shaped cover lifts off. Under the front lip of the large D shaped cover, right in the center is a button, push the button while lifting up and pulling rearward. All of your fuses and relays are located underneath, as well as your OBD connector.
×