Question about 1995 Oldsmobile Aurora

1 Answer

How to remove a door panel to an oldsmobile aurora

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Remove the two screws at the bottom of the door panel, and remove the plug around the door lever and remove the screw. Now lift up on the door panel. it needs to come up about an inch before you can pull it off, you will need to pull the insert out around the lever and pull the lever to get the door panel to clear.

Posted on Jul 18, 2010

  • abt4354 Oct 31, 2014

    power door lock switch not working

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind of tool do you need to remove door panal


two screws in bottom of panel and one behind the trim panel of the inside door handle. lift the panelfrom the bottom ( up not out) may need to pull out slightly at door handle. panel should slide off.

Dec 20, 2011 | 1998 Oldsmobile Aurora

1 Answer

1999 aurora front door won't open from outside with either remote or key won't open from inside with handle


If you can't open the door you can pull the corresponding seat to gain access and remove the inner door panel

Oct 29, 2011 | 1999 Oldsmobile Aurora

1 Answer

2001 oldsmobile aurora right rear window will not go up or down, you can hear the motor running and how do you get the door panel off. there are no screws showing.


the rear windows on the aurora move on the guides using cables and they jam up in the runners to fix this yuo will need to replace the window regulator.

Mar 11, 2011 | 2001 Oldsmobile Aurora

1 Answer

How to install a outside car door handle


you must remove the interior door panel. then looking through the opening behind the handle, tou must remove the linkage, usuall held on with a plastic clip. then there are usually two 10 mm bolts or nuts, that secure the handle in place. remove the handle, replace it, and reinstall your door panel.

Dec 30, 2010 | 1997 Oldsmobile Aurora

1 Answer

Remove front door panel 1999 olds aurora


remove the two screws at the bottom of the door panel, and remove the plug around the door lever and remove the screw. Now lift up on the door panel. it needs to come up about an inch before you can pull it off, you will need to pull the insert out around the lever and pull the lever to get the door panel to clear.

Jun 24, 2010 | 1999 Oldsmobile Aurora

1 Answer

Right rear window is off the tracks. How do I remove the panel?


if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door

Aug 30, 2009 | 2001 Oldsmobile Aurora

1 Answer

Can somebody tell me how to replace the window regulator in a 2001 aurora


You might want to take it to a glass shop. You have to take off the inside door panel and find all the screws to do this. Then if it is the drivers door you have to remove any electric switches to remove this panel. Then remove old regulator from motor and put in the new parts. I usually use a piece of wood and a clamp to keep the glass from falling. A glass shop can do it within an hour and you don't have to chase parts.

Jun 24, 2009 | 2001 Oldsmobile Aurora

1 Answer

How remove the rear inside door panel on a 2001 oldmobile aurora


The inner door panel is held in by clips and screw.
Look at the door near the door handle there should be screws holding it in and along the outer edge of the door. Once loose, and the door handle removed or the arm rest removed. The door panel then prys out , because of the clips that hold it on. Then pops out by applying pressure to the panel upward to the top of the door. The clips always break because of the design and plastic.

Good luck

Mar 21, 2009 | 2001 Oldsmobile Aurora

1 Answer

Rear door panel removal


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Jul 19, 2008 | 2003 Oldsmobile Aurora

Not finding what you are looking for?
1995 Oldsmobile Aurora Logo

Related Topics:

3,073 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...