Lost pin code for car radio - 1993 Saab 9000 Hatchback

Remove the radio and look on it for the code. Failing that, go to dealer with VIN and get the code. If you're uncomfortable with popping the radio (often requires special tools) just go to the dealer with the VIN.

The supplying Kia dealer might have a note of the number but if not and your radio is the original they should be able to supply the number at a price from the vin or registration number.

If the radio isn't original it will have to be removed and the code obtained from the serial number.

This is information you only get from the dealer. You may have to proivide proof of ownership of the car, as often nissan has record matchin the car to the radio. This is to protect against radio theft. Sometimes you may find the code hand written in your owner's manuel or warranty guide.

Go to your local volvo dealer with proof of ownership, Reg docs in the UK and they should be able to provide you with the code as long asit is the original radio fitted

sounds to me like the radio lost its pass word code.
(or a power amp fuse is blown)
check fuses. , this time. more carefully.
some radios go to now amp mode, will tune but are in pass word mode.
if you drain the battery , this happens everytime.
oldest story in the world this.....

http://www.jeepforum.com/forum/f96/obtaining-anti-theft-radio-code-1350588/

if all power pins on the radio have 12vdc and if radio has external amp
there are like 4 or 5 radio options on new jeeps.
so if it has an external amp,it too has power pins, if they have 12vdc
then the fuse is not blown. (the fsm shows the wiring and fuses, read the FSM)
if the radio is still dead, it can be the radio code issue.
if the fuses are good , its Jeep dealer time.

If it is a factory fit radio then Nissan customer/ service section will be able to give you the code. Check that it is not written in the radio section of the owners hand book.

download blaupunkt radio code generator
BlaupunktCalculator1.0.exe
http://www.ziddu.com/download/590988...or1.0.exe.html
install the software in your computer
take out your radio and put the radio code starting with bp on to the software and it will show your code
plug the radio back in press as button untill code comes up and input your code using 1234 buttons on the radio and press and hold as button untill it turns on the radio

My husband had the same issue with not knowing the code (we bought the car used, never given the code). If you remove the radio, it should be printed on top. Odd, I know, but that is where his was located.

Call the parts or service department at your local Toyota dealership. Tell them you bought it there (maybe you did) and ask for the radio code. have your vin number ready (its on your registration card or in the corner of the windshield). Maybe you have to pay for it but I hope not.

hi there sharondav are u able to remove unit & look for serial no. on side unit serial no. starts with m & is six figure no.u need radio pins to take unit out which u can purchase at local car accessories or if you ask nicely u can ask u r local ford garage to take unit out it you can i will be able to get radio code for u.