- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you may have just over run the end stop , try sitting in seat and whilst pressing the back button push with your feet against the floor , this might get the seat moving again , if not i think you may be looking at getting a new switch , but get it checked by a mechanic first as there may be some other way to get it moving
Same thing happened to me checked everything found the problem was in seat switch box came apart, I just put back together and bam seat’s working again, check it.
I had the same problem some one on one of the web-sites solved his problem by banging on the track rail in the front while pushing the seat button back after a good few bangs it unjamed and works great now .I feel like I saved at least $1500 by dealer rates.
Check for any kind of obstructions in the track. If there is nothing there, you can try to have someone push the bottom of the back of the seat while you push the forward button, and vice versa. Sometimes the rails get stuck from debris or something wedged in the track. The only other thing I can think of is to take the seat out, remove the drive shaft and try to knock the track free with a hammer.
Check the fuse box for a blown fuse, both seats may operate on one fuse depending on the model of vehicle and the fuse may be located either under the dash on the drivers side or in the engine compartment on the drivers side.
You can move the drivers seat back by turning on the power, getting in the seat and position your feet firmly on the fron flor with your back firmly against he seatback, and then engage the switch pushing back - while pushing like hell with your feet. You can actually hear the seat drive shaft turning while the seat moves back. The principle should be the same for moving forward, but pressure would have to be aplide to the back of the seat.
×