1996 Volkswagen Jetta Logo

Related Topics:

Posted on Aug 15, 2017

What are the color codes to a 1996 jetta to a wiring harness, im trying to hook up a pioneer head unit up to the wiring harness and i connected all the wires except the red and yellow wirers from the unit and the pink wire, the orange with a yellow stipe and the yellow with a red stripe from the harness, i dont kno which two im supposed to hook together and i can't read the letters any more

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 02, 2008

SOURCE: Instrument cluster wiring 1989-1990 vw cabriolet

Not sure what the other wires go to, maybe the air bag, regardless all instruments are working on the '89.

Ad
ourhowse

Dar

  • 2007 Answers
  • Posted on Nov 03, 2009

SOURCE: I have a pre fab wiring harness on my trailer with

I assume you only want lights, brake lights and signals. Your best bet is to plug a wire onto your truck... the flat plug, and turn , first the left signal, on. Use a test light to see which part of the plug in is flashing. Once you have established that, just keep plugging the other end of the wire into the trailer plug, until you get the left turn signal flashing on the trailer. Then repeat the process for lights etc.
You can also take the plug-in apart on the trailer. Inside the plug in it will have l/t, r/t, s, etc. (left turn, right turn, stop, etc.) There will be a very small arrow pointing to the terminal connection that is for each.

Testimonial: "Thanks, that should be an easy and sure way."

Anonymous

  • 54 Answers
  • Posted on Nov 15, 2009

SOURCE: Wonder if anyone out there knows which wire is

get a repare manual it will show the wireing. bobg22

Anonymous

  • 73 Answers
  • Posted on Jan 04, 2010

SOURCE: Stereo Wiring 1984 VW Rabbit

red brown is speaker(rear left),grey blue is remote for anntena.Hmm,red black possible is a amp or a live one(+12V)

A

Anonymous

  • Posted on Sep 20, 2010

SOURCE: 2004 Ford Expedition, battery draining

Start pulling fuses,one at a time,with an AMP meter in series with a battery cable. When you find anything over a few Mili Amps still on,you found the item,assuming every system has timed out. Some may take 15 min to do so. 40 Mili Amp will always be there, to power memory,clock,etc.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Trying to wire in a after market pioneer stereo into my 1995 f150 4wd have looked at color code schematics but from the speaker plug harness colors do not match have started pulling left door panel

They sell a installation kit so you dont have to cut any wires. You unplug the factory unit install the proper plug into the new unit and factory harness and your done.
0helpful
1answer
0helpful
2answers

I bought a sony deck to replace the bose stock deck on my 1996 nissan maxima. I purchased the wiring harness and antena adapter also. I hooked everything up right and getting power but im not getting no...

each speaker in your car runs the wiring thru an amp. So each spkear has its own amp for the bose system. You can not hook up a none bose radio If you do you will need to run new wires and replace all the speakers. Sorry.
2helpful
2answers

Installin 07 f150 head unit in 04 f150

You could try a Salvage yard if you know what it looks like. Then I would think the Dealer may have a harness and experience with Ford radios. Radio Shack maybe, then last would be a Stereo shop but you need to know if they are a good installer. You would not want electrical problems after they work on it.
0helpful
1answer

Im hooking up a pioneer radio in a 1999 alero

anytime you are installing aftermarket stereo in car you should purchase wiring harness converter which comes with schematic, but if you insist on doing it old school youll need a repair manual to show color codes on wiring or a 12 light meter but lucky for you I looked up the wiring codes online heres link:
http://www.the12volt.com/installbay/stereodetail/1690.html
1helpful
2answers

97 dakota installed radio harness have power no sound

If you still haven't fixed this, look at your wiring harness. The blue wire that comes off your factory harness is the external amp in the Infinity stereo. I found this out when I hooked my Pioneer head unit up. Coming off the aftermarket stereo should be a blue wire that says remote. Hook those up and you should be good to go.
0helpful
2answers

How do I connect a line output converter to my factory head unit

depending on the type of line out converter that you have you simply just take the speaker wires coming from the head unit (you must know the color codes for the wires or you can do the process of elimination by pulling off the door panels and and viewing the colors and matching them at the wire harness behind the head unit). Pull out electric fuse for radio so you dont blow it while hooking up the wires. After you have done that just connect the speaker wires coming out of the head unit to the line out converter this will pre-amp your signal. After you have done that step on the other side of the loc you will have to connect and run rca audio cables to the back of your car to hook into your amplifier. The last step is to splice the power and ground wire coming from the wire harness and connect the radio power wire and loc power wire to the main power wire and then connect the radio ground wire and the loc ground wire to the main ground wire. Test and your done with the loc.
Not finding what you are looking for?

109 views

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...