2000 Cavalier: replacing signal bulb on 99 cavalier drivers side ...

How to change front turn signal of 2000 Chevy Cavalier
Something like this.

Check all turn signal bulbs, front and back, you probably have a blown bulb that is shorting the circuit. If all lights are ok, try removing them and installing one by one while circuit is energized, tif the fuse is blown on the first bulb try another location, his way you double check that the bulbs are not at fault. if it blows the fuse again, check your turn signal switch, it may be defective.

Good Luck!! Don't forget to rate this post!!

The following site has a pretty good writeup for this.

http://www.techsupportforum.com/automotive-center/automotive-support/386142-99-cavalier-passenger-side-turn-signal-bulb-change.html

try replacing the tail lamp socket. it could be shorting out

Sounds like the signal multi-function switch has a short it it. Get a new one.

YOU HAVE TO THE FRONT HEADLIGHT HOUSING TO REPLACE THE TURN SIGNAL BULB.

The turn signal switches are known to go bad, try to use the turn signal switch and jiggle the lever after clicking to the left turn. Replace signal switch assembly.

Sometimes even a new bulb will not work. If you have a Digital Multi Meter you can check that you have power going to the rear. I know that sometimes when a vehicle loses a bulb in one end that it can make the other end stop working. With that said, I suggest that you double check to see that the front works. I used to own a 98 Cavalier RS with the 2.2 liter motor and I know that there are fuses under the hood and behind a little door on the drivers side in the car. Might check fuses under the hood also.

I know what you mean, it is really tough to get to.  I just had the guy from autozone put it in for me when I bought it.  It got to it quick.

could be the flasher.