- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Why won't key work in door? Most likely not used? Spray wd-40 in door lock and insert key moving it back and forth in a sawing motion. This will usually free up a sticky lock and you can then turn it. Most lock out companies use a long metal rod. They will pry back the top of the door where it meets the roof and insert a wedge to hold the door slightly ajar and then insert the rod which has a hook to catch the lock and unlock it. A coat hanger unfolded will usually do the trick with a little patience. If not, the only other way is to disassemble the inner door panel ( usually causing damage ) to get the door open
You can get the key code from the importer probably if you can prove ownership.If they cannot help try contacting the manufacturer through their website.
Jaguar Cars
Browns Lane
Coventry
UK
iF THE KEYS ARE LOST A GOOD AUTO LOCKSMITH SHOULD BE ABLE TO HELP.If the lock is jammed the screws can be drilled out.
You have several options
Good Luck
I'm not sure what you mean by "reset" but have a look for an OBDII / EOBD AUTO SCANNER (there's usually one or two on ebay.) Is that the sort of job you want to do?
If you press the unlock button on the key fob twice when you first unlock the car this unlocks all the doors and the boot. If you have only pressed it once only the drivers door is unlocked. If you have only pressed it once and you have started the car push the locking button on the door and the pull it this will then unlock all the doors and boot too so you don't have the turn the car off and press the unlock button on the key fog again. The locking button or lever is located above the door opening handle inside the car the smaller one of the two
Try inserting the key into the drivers door lock and try centrally locking and unlocking all the doors a few times. If this does not reset the valet function try using the key in the drivers door lock and pressing the fob at the same time as locking and unlocking the doors. Even with valet mode engaged you should be able to access the trunk by physically inserting the key into the trunk lock.
You lost your program of the key module follow these instructions.
To Program a Remote for a VW
Put your good key in the ignition and turn to "ON", do not start the engine. Make sure all the remotes you want to use are present because they have to be programmed at the same time. - Close the door and insert key #2 into the driver's side lock. Lock the door. -Within 5 seconds of locking the door, press unlock 2 times on the new remote, key #2. -(if this is remote #3, press unlock 3 times. if this is remote #4, press unlock 4 times). -If there's a chirp or beep do not press it again. This means that the car has recognized the new keyless entry remote. - Repeat with other remote or unlock the car and turn off - done.
×