I need the code to unlock the stereo in my land rover..?

Hi there,
I think its fairly standard across all Land Rovers. First of all you need a code. This was supplied on a credit card sized piece of card with the original vehicle. I'l assume its not to hand... Typically, you can source the code (which is specific to your serial number / radio) from a supplier such as this on eBay

http://cgi.ebay.com/Land-Rover-Radio-Code-Decode-Service-22Dc710-61B-61L-/380186172853?cmd=ViewItem&pt=UK_Audio_TV_Electronics_In_Car_Entertainment_GPS_In_Car_Audio_Players_PP&hash=item5884dc9db5

Code in hand, you are ready to enter it and unlock the radio.

You only actually need numbered button <1> and the two seek buttons that look like <| and >| .
-------------
When you turn the radio on, you should see it request <CODE>

Press preset button <1>. This should identify character 1 of the code.

Use one of the two tuning buttons (Seek up , or seek down - the ones with arrows going into lines) to move to the right number (0-9).

Press preset button <1> again to lock digit 1 and move onto code digit 2.

Repeat twiddling the upseek and downseek. Press button 1 etc .... until all four codes have been entered.

When you press <1> for the final time, if the code is correct, you'll get a two tone beep to confirm and the radio is unlocked.

If incorrect, you are progressively locked out (in doubling time periods).

Hope this helps.

If you have your VIN, and the serial number on the stereo, you can contact a LR dealer and they will give you the code.