HI. Here are a few details about this remarkable sensor and its functions.
This sensor monitors the temperature of the engine and sends that information to the engine control computer to regulate the amount of fuel needed. More fuel is needed if the engine is cold; less if it's hot. If the temperature is extreme, the signal will be sent to the temperature gauge as a visual indicator of overheating and imminent danger. The location of this device(Cylinder Head Temperature Sensor) will be on the passenger side of the cylinder head, under the third intake port from the front in the valley of the engine. White/violet, and brown/white will be the colors of the(2) wires that connect to the sensor.
You guys are either not reading this right or don't know the answer. The cyclinder head temp sensor and the engine temp sensor are different. Now don't get me wrong because I don't know where my ets is on my 00 linc ls v8 either and could use some help myself because I'm no mechanic. If I may apologize as this could be the wrong thread but I need answers. Thank-you [email protected].
Jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
The CHT (Cylinder Head Temperature) sensor sends a
signal to the PCM (Powertrain Control Module), to the hydraulic fan
solenoid which enable the fans, see below.
The CHT is located under the intake manifold, in
order to properly diagnose you will need a NGS (New Generation Star) or
equivalent scan tool.
Hope this help.
im sorry i wasnt more specific, but my alldata says there are two sensor and its not the cht sensor its the other one, the coolant temp sensor. id really like appreciate more help.
×
6,431 views
Usually answered in minutes!
×