At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Every time i start the car i get a hi pitch noise, like scratching your nails on a blackboard. it last up to 1 minute and then it stops.no noise when i drive???
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
bettr get a new timing chain-will break soon and hurt motors valves--put a new water pump and engine seal at same time-save$--hav an xperiencd independent du the job--dealers are usually troubl
When you turn the key to position II, does the noise start then? This would be the fuel pump. If it is making a noticeable noise while driving, then you should get whoever fitted it to check it over. If it failed, your car would stop immediately.
Do you have the brakes taken apart once a year, on all your vehicles, for rust removal,inspection, needed work & lubing,that is required Have to flush brake fluid every 2 years, if you don't want moisture in the system ruining it Don't know what the noise is,work on the brakes & then get back to the noise, if it's still there
hi, some things that happen to brakes is that the rotors get worn in the middle causing a lip at the top and the bottom so when you put your foot on the brake pedal the brake pad lays flat on the rotor as normal, but when you release the pedal the brake pad then rides on the two lips causing the squealing noise, the other thing could be, if you haven't done this already that is, copper slip, copper ease, what ever you american's call it lol, put some of this on the back of the pad then put it back in this will normally cure it, and last but not least, when you replaced the original old worn ones, did they have little plates on the back of them? if they did , these are anti squeal plates, so if you neglected to put these on the new ones that will be another cause, but check the rotors, and put some copper slip on them that should do the trick...hope that helps
×