At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fuse's 15 5amp , fuse 13 20amp an fuse 5 15amp located in the central junction box . Inside the vehicle under the dash right or left side . you'll have to look .
The most common problem on this vehicle is the sensor right on the master brake cylinder the seal goes out and brake fluid gets right in the sensor ruining it that is the most common problem lete no if it helps
well the cruse control has a cruse control module check that out but for the the turn signals and dash light if you already replaced the fuse maybe the lights burned out or you have a bad ground somewhere
Need to check the brake light switch. ok down by the brake pedal there is a switch that tells the lights to turn on when you push it. almost always easy to fix and you can buy a switch aftermarket for around $10 bucks. If you have cruse control a good way to check the switch is to run the cruse con and try to get it to stop crusing by pushing the brake pedal if it keeps going thats your problem. hope this helps
cruise control module or sensor fuse should be inside vehicle fuse box or under hood in fuse box some time link with other curciut check all fuse and relay properly
I had the same problem with my 2003 santa fe. Do you have any brake lights out in back? Weird as it is, as soon as I fixed a burned out brake bulb, my cruise worked again. The only relation I can think of is that tapping the breaks causes cruise to turn off - so maybe a broken brake/tail light passes a singal to cruise control from some reason???
×