Turning Signals not working

Check the wiring from the signal stalk

All lights,windows andradio works it will not turnover to start

Are you sure you installed the correct bulbs .Double ck you installed the bulbs in the correct socket and that the bulb #(1157)(3157) is the right bulb installed.

Its on the left kick panel.

It's the same bulbs I believe, so look for the flasher module, the most likely suspect. It should be a round metal or plastic can, pretty accessible under the driver's side dash.

They use a different flasher module for the emergency lights because it's turning on and off more bulbs.

I think that your flasher is bad I believe that the 4-ways flasher is a seperate flasher unit it should be in the fuse box and look like the 4-way flasher , to find the flasher turn on the 4-ways and you can feel it or hear it flashing and lok for the flasher for the turn signals
Mike

no ur problem will be the flusher realey

I know this will sound Stupid. Get back inside to the Bulb that you Replaced and Turn it Over. Some of these Bulbs will only work if they are in a Certain way. Have that Side Blinker Going when you are Messing with the Bulb to Minimize the Work load on thisPlease Rate my Response, I need all the Help That I can Get! Thanks! Job.

There is a Turn Signal "Flasher" that should be on the Fuse Panel inside the Car. If not it will be in the Fuse Relay Box under the Hood. This is the Problem and needs to be Replaced. Let me know if you need more Help! Please Rate my Response, I need all the Help I can get! Thanks!

Have you tried replacing the flasher? They're typically round, and with the fuses under/in the dash. They probably cost 10-15 bucks, usually available at your local autoparts store.