What are the big end torque specs for 2.8 diesel Hilux? 3L engine

1. Africa "?
2. NO CAR TOLD 2015 (GDx) X= 6= CYLINDERS.
3. NO YEAR CAR TOLD
4. IS ENGINE TURBO, AS SOME ARE,AND MATTERS.
5. COMMON RAIL DIESEL SURE.
6. Global Diesel Six Cylinder?
7. ENGINE CODE : 2GD-FTV 2015- 2.4 L (2.393 cc) INLINE 6
   

MUST WE GUESS THIS?????????
THE WIKI LIST ON 1GD OR 2 GD.

Applications

Hino 200[14][12]
Toyota Coaster (B70) (2022-present)
Toyota Dyna[11]
Toyota HiAce (H200) (2018-present)[15]
Toyota HiAce (H300) (2019-present)[16]
Toyota Hilux (AN120/AN130) (2015-present)[17]
Toyota Innova (AN140) (2016-present)[18]
Toyota Land Cruiser Prado (J150) (2015-present)[17]
Toyota Fortuner (AN150) (2015-present)[19]
Toyota GranAce/Majesty (H300) (2019-present)[20]
Yanmar 4LV (marinized version of 1GD-FTV)[21][22][23][24][25][26]
Thairung Transformer II

Here you are.
Cam caps 12 ft/lbs 16nm
Crank cap. 45 ft/lbs 61 nm 1st step then 90 deg.
Flywheel 61 ft/lbs 83 nm




I hope this helps. Take care

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

Wiring, schematic, electrical diagrams, torq settings, parts info, error/fault codes, full assembly/dissembly, service instructions an d a lot moreetc are basic contents of these online books they here on this website https://big-manuals.com/

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few like.. reliable-store .. let me know if u need help
thanks

Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Hey

As i know you face a lot of problem.Due to this I give you one mail address it really help full for you.Please visit it.

Torque Settings Mains = 108NM
Big Ends = 54NM + 90° +90°
Flywheel = 122.5NM
Cylinder Head = 78 NM + 90° + 90°

Valve Settings
Exhaust = 0.40 mm - 0.50 mm
Intake = 0.20 - 0.3 0mm

you should be able to look up a utueb video on the Hilux diesel 3I shod fine vids of someone who has dont the job also you can look up the item here and find anything else you need >>>www.discountbargainprices.com