At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the hazard flasher is working but the turn signals aren't, the problem is most likely either fuse A11 or the #2 relay in the trunk fuse block. However, if these check out, the problem could be either the turn/hazard switch assembly or the turn flasher module.
If both the turn signals and hazard flasher are not working, the most likely problem is the turn/hazard switch assembly.
is a new hazard switch you replaced it with and check to make sure the hazard swith is coming all the way out if it hangs just a little bit it will be in a neutral position and the turn signals wont work and if thats not it your multi-fuction switch feeds the turn signal lights it could be faulty
Look Behind The Clock On The Dash, Take That Out and There Should Be Two Connectors One Is For The Hazards And Signals And the other The Clock If They Are Not Connected The Hazards And Signals Wont Work. You Will Need A Flat Head To Take The Clock Out. Hope That Helps.
it sounds like the relay has gone for your hazard lights, when you press the button to turn them on, it will disconect the power to the main indicators hence wont work when hazards pused in, try locating either the hazard flasher unit, or the relay , have you checked the fuses?
the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem
ok when u run ur turn signals do the stay on if so i sugjest to check ur wires that are in you left hand side make shure u dont see any cable teed in to 3rd backe ligh some one did that to mines and now none of my brake lights work whit out it if thats not the problem it might be ur turn signal swith or try ur fuse realy out as well.. good luck
×