Check your FUEL INJECTOR HOUSING. The old style factory housing most likely has an internal crack. OLD style has the INJECTORS AT THE HOUSING with tubes running fuel to the engine. NEW housing has wires running to the INJECTORS AT THE ENGINE. If you have the OLD style then it is probably (99%) cracked. This will cause fuel to be sprayed into neighboring cylinders causing a firing problem. This crack IS NOT visible because it is internal. After exhausting all the regular solutions to your misfire with no success, you will probably try to replace the individual injector (like I did....cost approx. $300) and you will still have the misfire. To replace the entire housing with injectors will cost around $400. Good Luck.....on other forums, I've seen people replace anything and everything (including engines) and still had problems with the misfire.
If you're in Louisville KY and need a mechanic (not a parts replacer) for this, try Tony Johnson @ 3215 Fern Valley Rd. 502-387-0847
CYLINDER 2 MISFIRE CAN BE CAUSED BY MANY THINGS LIKE FAULTY OR DIRTY FUEL INJECTOR.BAD SPARK PLUG OR WIRE.BAD COIL.INTAKE LEAK TO THAT CYLINDER OR.LOW COMPRESSION DUE TO WORN VALVES AND RINGS.YOU CAN DO A COMPRESSION TEST IF PLUG - WIRE -COIL - INJECTOR GOOD.
646 views
Usually answered in minutes!
GO TO THE WEB LINK.http://www.aa1car.com/library/misfire.ht...
×