Belt routing for a 1997 buick riveria suppercharger

there should be a decal under the hood somewhere that shows the belt routing. if its gone you can probably go to the library and find a book of your car that will show the routing and you can either draw a picture or take a photo of it.

try this site and pic.

http://images.wrenchead.com/smartpages/partinfo_resize/GAT/S6024.jpg

Heres a belt diagram, hope this helps. good luck. the diagram shows you the regular belt route and the super charger belt.

I can help, a belt diagram for a 1997 park ave, some of these cars come with a super charger, heres a diagram that list both the regular belt and then the charger belt, use what is needed, hope this helps.

Yes. Does the supercharger belt run anything else? I can't remember.

Click on the following free, direct Link. It has several Belt Diagrams including the Belt Diagrams for your 1996 Buick Park Avenue Ultra with the 3.8L V6 Super Charger.

Scroll Down the Link Page about 2/3rd down for your Diagram (G00005648).

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/buick/model/park_avenue/1996_buick_park_avenue_drive_belt_routing_diagram.htm

If it is still on all the pulleys you will have to find a tensioner pulley and loosen it. Then it should slip right off. I found that you may have to take both belts off depending on which belt you are trying to take off. To replace it-there is a diagram in the owners manual that shows the correct route/positioning!!!

that engine uses 2 belts I believe. if the diagram isnt clear, draw your own. Gates belts has diagrams for belt routings, on their website, look up yiu car, find the belt, then click on the camera icon to see the routing.