1- Begine the process by turning the ignition key to the no. 1 (On) position.
2- Push the systemselection buttons until "Kilmeter reading" appears on the multi-function display.
3- Push the dimmer knob ("R" button) three times; you should hear a beep and voltage should read out on the multi-function display.
4- Turn the ignition key to the no.2 (Run) position.
5- Push the forward/back scroll buttons until "Service display" appears on the multi-function display.
6- Push the dimmer knob ("R" button) once; "Oil type" should appear on the multi-function display. Use the +/- buttons to select the oil type that was added to the engine.
7- Push the forward/back scroll buttons until "Confirm oil reset, press R button for 3s" appears on the multi-function display.
Push the dimmer knob ("R" button) in and hold it for three seconds; "Service confirmed" should appear on the multi-function display.
8- Push the forward/back scroll buttons until "Service display" appears on the multi-function display.
9- Push the system selection button until "Kilometer reading" appears on the multi-function display, then turn the ignition key to off position.
Reset process should be listed in the owners manual.
Should be something like turn car to on(not running) press trip button twice, turn to off and hold trip button till it resets.
SOURCE: how to reset service light on a 2006 mercedes e class
1 key on #1 position
2 go to mph display in the cluster
3 press trip odometer knob three times (QUICK) voltage will appear on display
4 Select service menu using + or -
5 Service Indicator Displays Items
6 Press the menu systems button until the MPH display appears
SOURCE: How to reset 2001 Mercedes-Benz E 430?
hopefully you are maintaining your vehicle and having the proper synthetic oil installed in it. Since your vehicle is out of warranty you will only be cheating youself if you are just ressetting the indicater. On this version you must first put the key in position #2.. find the page on the cluster where it shows the odometer reading by using the page buttons on the steering wheel. Next using the arrow key scroll up untill you see the service interval portion i.e. A service past due... while that screen is showing you hold down the R button ( it should be located on the right side of the instrument panal towards the bottom). keep holding that button for approximatly 10 seconds. after that it will ask you if you would like to reset service interval. release the R button and press it to confirm. The interval resetting procedures are all very similar but certain models and years have different knobs and instrument clusters.
SOURCE: how do you change oil in 2006 mb cls and reset
Practice now is to do a Top Side oil change. This means the engine oil is vacuumed out of the oil pan via the dip stick tube with an oil extractor..
Why ? Because this is quicker, doesn't need a hoist or pit and you don't have to remove the fiddly under covers to get to the drain plug..
Mercedes deliberately places the bottom of the dip stick to withing 1/16" th on an inch of the bottom of the oil pan.
Most if not all engines no have no dip stick, just a cover plug.
Oil level is checked with the cluster and scanner.
Setting is usually around 53mm on the scanner read out.
Oil filter is to the center right of the engine under a screw on plastic cover.
Mercedes special tool needed to unscrew it or generic tool available at auto parts stores.
Oil filter kit comes with large O ring for cover and oil filter element.
To reset FSS you turn to your handy owners hand book and read about the Oil Service Reminder Reset.
It explains how to use the steering wheel buttons and the 'R' button on the left of the cluster.
.
1,053 views
Usually answered in minutes!
×