At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Nothing is happening when buttons pushed for key fob . battery may be dead? not sure how to remedy, this just happened. I do not have key to enter vehicle, it is used so this is my only source of entry and usage of vehicle
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
limited info generic answer check and test battery -- most likely the key fob itself is failing you can have some one test fob or get another fob[s] and have programmed
There's an antenna for the transponder receiver built into the key surround on the 9-5, it could have had a knock or be faulty.
On the 9-5 if the transponder stops working and you get a key not accepted message then you can override it by pushing the unlock button on the key remote with the ignition turned to on and it should let you start the car.
If this only happens when the key fob is close enough for the car to "hear" the signals transmitted from it then chances are the fob is failing. The FOB will have to be taken apart, cleaned and inspected for contamination/corrosion/stress cracks.
If the car does this on it's own even when the FOB has no battery or is too far away to be heard, then the problem could be internal on the TWICE (Theft Warning Module) or a power lock switch.
Since you said the horn beeps I would say it is most likely a FOB inadvertently transmitting signals even when you're not pushing buttons. Repair or replace the fob and you should be okay.
Be sure to use the correct battery, properly in place, clean the key contacts , See owner's manual for additional information.
There are specialized locksmiths for car keys
the car came with 2 RKE FOBs
are both dead.?
alway have 3 FOB if not you can not reprogram a new one. self.
can cost you $300 for more to tow your car to the dealer if the 1 fob dies. never run one fob. or bad happens.
put in a new battery in the FOB for door issues
the transponder part does not use the battery .
the transponder must be good, or the car would never run.
the jeep cuts fuel after 2 seconds if the transponder fails.
You probably caused a short circuit when you changed the light. Change fuse #14. Next time, don't turn the lights on until you are finished changing the lights.
×