My 2006 lincoln zephyr's front turn signals quit working. I can't find a fuse location for turn signals. Is there one?

Hi
I would imagine there is either a fuse or a thermal link, probably fitted under dashbord fuse box.
You may have to Google its location.
Good luck

Roger

https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.autogenius.info/lincoln-zephyr-mkz-i-fuse-box/&ved=0ahUKEwi-hvyVmbnTAhVI3IMKHVDFDcIQFggaMAA&usg=AFQjCNG91zFyi069xUH_l63W-q-_wjMNSQ&sig2=cw-4kEjMSR_1l-X1xubXEQ https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.autogenius.info/lincoln-zephyr-mkz-i-fuse-box/&ved=0ahUKEwi-hvyVmbnTAhVI3IMKHVDFDcIQFggaMAA&usg=AFQjCNG91zFyi069xUH_l63W-q-_wjMNSQ&sig2=cw-4kEjMSR_1l-X1xubXEQ

Replace the BCM.

On this website (link below) you finde fuse box description and diagram for Lincoln Zephyr Lincoln Zephyr MKZ fuse box Auto Genius

just eject them backwards from 6 until 1 that worked for me

Lincoln Zephyr MKZ fuse box Auto Genius

On this website (link below) you finde fuse box description and diagram for Lincoln Zephyr

its near the front under neath the engine near leftside of carremember turn the oil drain out towards the right driver tires

Not quite sure if you are talking about the stoplamps or the parklamps which would I think be front and back. But if you look in the fuse panel located inside the vehicle to the left of the steering wheel by the brake pedal, in the number 4 position is a 15 amp fuse which covers parklamps & the license plate lamps. In the number 21 position is the stoplamps fuse and is a 7.5 amp fuse. This should be in your owners manual if you have one. if you need an owners manual for your car, you can email me at [email protected] with your make, model and year and I will be happy to email you a copy of it. No worries it won't cost you anything.....yes there are still free things in the world. Anyway here is a picture of that fuse box layout for you if you need it. I hope this helps you and good luck.

It is located under both front seats, raise your seats up, and back as far as they can go. You will see that they are round in shape, twist the plastic slightly, and remove them.

Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.