Most modern vehicles have the Belt Diagrams on the underside of the Hood, but they do disappear from time to time.
WHAT YEAR ?????
Click on the following free, direct Link. It has a variety of Drive Belt Diagrams, POSSIBLY with your vehicle depending on your YEAR.
Let me know if this helped.....
http://www.2carpros.com/car_repair_information/index.htm
SOURCE: belt diagram 2004 5.7 liter engine dodge ram 1500 1/2 ton 4x4
click on this link, and scroll down to 5.7L
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800ba71e
SOURCE: 1995 dodge ram 1500 V8
hi, you should find a serp. belt routing diagram on the cross member that supports your radiator. if not- disconnect neg batt terminal for safety. you'll need a long breaker bar metric. as most, if not all fasteners on your ram are in metric. cant remember right size socket, but just go through your metric set and "eyeball"it. once you have the proper socket-detention the belt by pulling breaker bar clockwise. remove old belt. it maybe useful to take a picture of how your old belt is routed with a camera equipped cell phone (if it is still on) so that if you get into trouble, you can look at the picture as a reference point. new serpentine belt install--insert new belt over the cooling fan route under crank pulley-over fan pulley, around p/s pump pulley,up and around a/c comp pulley, under idler pulley, over alternator pulley and finally around tensioner pulley. pull breaker bar clockwise to slip belt past and onto the tensioner pulley. release tension on tensioner. be sure to check tensioner indexing marks located on the tensioner arm this is to make sure the new belt is installed properly. reconnect neg batt cable to terminal-remove any hand tools from engine bay, start engine and observe belt operation. hope this helps!
SOURCE: I need a serpentine belt diagram for adodge
Here's your belt diagram.
if it's not correct let me know and I'll get you all the routing diagram for that year ram 1500.
Hope it helps.
1,073 views
Usually answered in minutes!
×