Diagram i need a 2001 Hyundai accent timing belt tensioner diagram. thanks

align timing marks then tighten tensioner..suggest you have shop do it one mistake spells disaster

Hi...not to question your "know-how"...but just need to clarify, is it your "timing belt" which is internal (inside your engine) or your "accessories belts" you need to install?

Timing Belt: http://www.autozone.com/autozone/parts/2001-Hyundai-Accent/Timing-Belt/_/N-jfdbfZ8zn9s and: http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f80378646

Accessories Belts: http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f8037824b

If I helped...please rate me..thanks!

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 2001 Hyundai Accent. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_timing_belt_diagram_marks.htm

2005 Hyundai Accent. I replaced the timing belt, I get sparks, but won't start? Thanks.

Diagram for timing belt and alignment marks:

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

To answer you more direct question about the Serpentine Belt driving the Alternator: It depends on what size engine you have. Also: if you only have 1-Belt: then yes it drives the Alternator. However if you have more than 1-Belt, then look at the Diagrams Provided (on the direct link) to compare which Belt drives the Alternator.


CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_drive_belt_routing_diagram.htm

hi from uk the cambelt timing marks for accent 1.3/1.5 petrol are as follows= the cam cog has a hole drilling between the outer toothed and the central securing bolt this hole at TDC number 1 cyl is at top central and lines up with a V cut in the cyl head at rear of cog ? the crank cog at TDC number 1 cyl is a pop mark on both the cog and on thefront face of engine quite noticable ! these line up and are at approx 12 -30 pm when viewed fit new belt from crankcog in anticlockwise ie crank then cam then tensioner HOWEVER! if you are considering just replacing belt and tensioner ? be warned this engine is an interferance engine that is to say if belt fails whilst driving there may/will most probably be damage to the valves (bent) due to contact with pistons so would advise caution and suggest compression test all cyls after fitting new belt and tensioner and before rebuild completely once valves have bent they will not contact pistons again but you will have serious missfire/s and probably back fire up inlet manifold coupled with failing to start if engine is high milage ? consider removal of cyl head and check? de coke and replace damaged or best all valves then engine will have improved performance and more milesin future hope this helps

With regrets, Not likely, pull the vlave cover and observe the height of the valves, if it is bent it should be not quite as tall as the rest.

My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions. I have only been on this site for the past 4-months as a free contributor.

I do not know if you still need this information, however I am answering it - in case you still do.

Click on the following direct Link. It has several Diagrams for your 2001 Hyundai Accent Timing Belt and Marks.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_timing_belt_diagram_marks.htm

have you checked the belt tensioner? It could be going bad.