The engine can most likely be purchased from Car-Part.com (used auto parts) and you should be able to get it installed locally at any auto service shop near you in Nashville. I live in south Nashville, and know for certain that there are many small shops to choose from, but check around and make sure you get a reputable one.
Pull-A-Part
SOURCE: 98 Expedition 4.6L Overheating, Blows Cold Air
Sounds like the fan and temp gauge (located on the intake mainfold is screwing up) , if its head gaskets it would be smoking out the tail pipe. Have you added any antifreeze if so was it once a week if so make sure nothings leaking on the ground if there isn't then its your head gaskets that would be a first for a 4.6 which is a good motor and none I would on ever had bad heads. I would check the water pump fan first with truck off grap fan at 9 and 3 and see if it wobbels forward and backward if so it's the fan. I have come across alot of bad fans. Fan would cost $30 and up. Rate of difficulty 1-10 I give it a 4.
SOURCE: how do i flush engine coolant in a 1999 Ford
Hunnybunny has typed in a step by step way of flushing it at home.
SOURCE: 98 ford contour wiring diagram
When you tell us "wiring diagram", is for one specific circuit or you are refer to the firing order?
SOURCE: Cannot locate single tank fuel
Hello
Ford doesn't sell ready to install fuel lines for a truck this age, I know this for sure, so you will not find them. I strongly suggest you try and locate a fuel line from a salavage yard, they made millons of these trucks and it should be fairly easy to locate a good fuel line.
68 views
Usually answered in minutes!
×