Question about 1999 Ford Taurus

1 Answer

How to change waterpump 1999 ford taurus dohc 6

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

3.0L DOHC Engine

  1. Disconnect the negative battery cable. Drain the engine cooling system.
  2. Remove the water pump drive belt.
  3. Disconnect the radiator and heater hoses from the water pump.
  4. If equipped, remove the A/C compressor-to-water pump brace.
  5. Unfasten the four nuts securing the water pump to the engine and remove the water pump.

To install:

how to change waterpump 1999 ford taurus - 0733e18.jpg

Fig. . 12: Water pump mounting-3.0L DOHC engine
  1. Clean the water pump to engine gasket sealing surfaces.
  2. Install the water pump using a new gasket and install the four retaining nuts. Tighten the retaining nuts to 15-22 ft. lbs. (20-30 Nm).
  3. Connect the radiator and heater hoses to the water pump. Make sure the clamps are securely tightened.
  4. If equipped, install the A/C compressor-to-water pump brace. Tighten the brace bolts to 15-22 ft. lbs. (20-30 Nm).
  5. Remove the water pump drive belt.
  6. Fill the engine cooling system, then connect the negative battery cable.
  7. Start the engine and allow it to reach normal operating temperature, then check for coolant leaks and proper engine operation.

Hope this help; TY for using Fixya (remember comment and rated this).

Posted on Apr 01, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the water pump drive belt on a 1999 ford taurus dohc 6cyl


here is a video for the sohc motor is it about the same way

Jan 27, 2013 | 1999 Ford Taurus

1 Answer

I need a diagram of how the plug wires are put on 1999 ford taurus station wagon


1999 Ford Taurus 3.0 liter V-6 VIN "2"

zjlimited_234.gif


1999 Ford Taurus 3.0 liter V-6 DOHC VIN "S"
and
1999 Ford Taurus 3.0 liter V-6 VIN "U"

zjlimited_235.gif


Hope helps (remember to rate and comment this answer).

Mar 07, 2011 | Ford Taurus Cars & Trucks

1 Answer

Can't find location of low radiator fluid warning sensor on 1999 Ford Taurus V-6 DOHC engine


Hello:

Usually on Ford automobiles, the low coolant sensor is built into the coolant overflow tank cap. If yours is this way, you can spot the wiring and electrical connector attached to the cap. The sensor looks like a dipstick in the coolant tank.

Hope this helps!

Oct 06, 2010 | 1999 Ford Taurus

1 Answer

Firing order for 2000 Ford Taurus


2000 Ford Taurus 3.0 liter V-6 VIN "2"

e809313.gif


2000 Ford Taurus 3.0 liter V-6 DOHC VIN "S"

d9b2e2e.gif


2000 Ford Taurus 3.0 liter V-6 VIN "U"

f1ecc25.gif


Hope helps (remember rated and comment this)

Aug 28, 2010 | 2000 Ford Taurus

1 Answer

Spark plug wiring for 97 ford taurus 3.0 dohc


1997 Ford Taurus 3.0 liter V-6 DOHC VIN "S"

963ec39.gif

Hope this helps (remember rated this).

Aug 03, 2010 | 1997 Ford Taurus

1 Answer

Waterpump hose it connects at the bottom of the waterpump the tip is a hose but the mid section is pipe and runs back to the radiator i went to the auto parts store and they told me to go to the salvage...


On a 3.0L DOHC Lower coolant hose Napa part # 9001

On a 3.0L OHV lower coolant hose Napa part # 9138

On a 3.4L DOHC lower coolant hose Napa part # 9075

I don't work for Napa but here at my repair shop we used Napa part's. these part's are stocking item's and if they don't have it in stock they can get it.

Jun 14, 2010 | 1999 Ford Taurus

1 Answer

Fire order for 97 ford taurus


1997 Ford Taurus 3.4 liter DOHC V-8 VIN "N"

42f4549.gif


1997 Ford Taurus 3.0 liter V-6 VIN "2"
and
1997 Ford Taurus 3.0 liter V-6 VIN "U"
and
1997 Ford Taurus 3.0 liter V-6 DOHC VIN "S"

05cacda.gif


Hope helps (remember rated this).

Jun 02, 2010 | 1997 Ford Taurus

1 Answer

Changing the back plugs on 99 ford taurus dohc 24


You have to remove the upper intake manifold.

May 17, 2010 | 1999 Ford Taurus

2 Answers

Where is cylinder #3


Several engine here, check this...

1996 Ford Taurus 3.0 liter V-6 VIN "2"
1996 Ford Taurus 3.0 liter V-6 VIN "U"

0af0d32.gif


1996 Ford Taurus 3.0 liter V-6 DOHC VIN "S"

d50d351.gif


1996 Ford Taurus 3.4 liter DOHC V-8 VIN "N"

41d2714.gif

Hope this helped (remember voted and rated this). Good luck.

Feb 10, 2010 | 1996 Ford Taurus

1 Answer

1998 ford Taurus 24v DOHC Overheating not thermostat


check to see if eans coming on if they dont then its fan relay if they are the rad is pluged or ther is an air pocket in the cooling system there should be a bleeder on it

Oct 06, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
1999 Ford Taurus Logo

4,206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...