You can change it without a press if you absolutely have to, but I really strongly recommend that you take it to a machine shop and have it done right with a press. My local shop charges only $65 for the job.
SOURCE: Wheel bearing trouble
This probably is a job you should leave for a good shop. I'm not saying that to discourage you. This style of wheel bearing requires the use of special pullers and installer tools. I have seen many experienced techs screw this job up. Because of the way the bearings are made, they have to be removed off the hub flange and installed in the knuckle with extreme care or the bearing will be damaged. If you do go ahead with this at home, have some very experienced help handy, this is not a job you can do over the internet.
SOURCE: Honda Civic 2007 Civic . Cahange wheel bearing and
sorry to tell you this but it sounds like the wheel bearing was put in backwards on one or both sides. the front wheel bearings have a black speed ring built in and that is what your speed sensor reads off. - this is common as the front bearings will install either way- hope this helps
474 views
Usually answered in minutes!
front wheel bearing is their away to change it without a press
Front, or back?
×