Question about 1987 Pontiac Fiero

1 Answer

What is the 1987 pontiac fiero gt v6 check engine light code list?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 14,092 Answers

CODE 12- NO DISTRIBUTOR REFERENCE PULSES ECM. CODE 13- OXYGEN CIRCUIT. CODE 14- COOLANT SENSOR HIGH TEMP CODE 15- COOLANT SENSOR LOW TEMP. CODE 21 - THROTTLE POSITION SENSOR VOLTAGE HIGH.CODE 22 - THROTTLE POSITION SENSOR VOLTAGE LOW.CODE - 23 MIXTURE CONTROL SOLENOID.FOR CARBURETOR ENGINE. CODE 24 -VECHICLE SPEED SENSOR. CODE 32 - BARO CIRCUIT LOW.CODE 32 - FUEL INJECTED EGR VALVE VACUUM SWITCH SHORTED TO GROUND.OR EGR VALVE SOLENOID CIRCUIT OPEN. CODE 33 - MAP SENSOR.CODE 34 - VACUUM SENSOR OR MAP SENSOR.CODE 35 - IDLE SPEED CONTROL. CODE 41 - EST CIRCUIT. CODE 42 - ELECTRONIC SPARK TIMING.CODE 43 - ELECTRONIC SPARK CONTROL UNIT. CODE 44 - LEAN EXHAUST.CODE 45 - RICH EXHAUST. CODE 51 - PROM OR MEM CAL.CODE 52 - CALPAK. CODE 53 -EGR VALVE CARBURETED ENGINE THE EGR VALVE VACUUM SENSOR HAS RECEIVED IMPROPER EGR VACUUM. CODE 54 - M C SOLENOID CARBURETED ENGINE MIXTURE CONTROL SOLENOID SHORTED OR FAULTY ECM.CODE 54- FUEL INJECTED ENGINE FUEL PUMP VOLTAGE IS LOW.CODE 55 - ECM MAKE SURE PCM GROUND CONNECTIONS ARE TIGHT.IF OKAY.REPLACE THE ECM.

Posted on Mar 27, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I hook up a tow rope on rear of fiero gt 1987 I just need to pull it back about 6 or 7 ft.


Search Results

    Pontiac Fiero Tow Hooks at Andy's Auto Sport

    www.andysautosport.com > ... > Pontiac Tow Hooks > Fiero Parts
    At Andy's Auto Sport, you can find Pontiac Fiero Tow Hooks at a great price. ... a ditch most tow truck drivers will hook up to a suspension piece or bumper risking ... Bolting a set of Pontiac Fiero tow hooks to the front and rear of your vehicle will ... Tow hooks provide a convenient and secure place to attach a tow rope or tow ...

    How to tow a Fiero with a pickup truck? - Pennock's Fiero Forum

    www.fiero.nl/forum/Archives/Archive.../20110502-2-106918.html

    Mar 3, 2010 - 40 posts - ‎9 authors
    OK, I have to go pick up a Fiero from Miami this weekend with my ... a strong rope. and someone inside the fiero pushing the brake pedal :P ... Went a tow dolley and towit by its back wheels and brace the ... any good tow points under the car, unless youhook it up to an a arm, .... 1987 Pontiac Fiero SE / V6 Hookup for raising car for engine cradle removal
    40 posts
    Feb 6, 2009
    U-Haul says "no" to using a tow dolly?!!
    40 posts
    Oct 31, 2008
    More results from www.fiero.nl

    What to do when your car has no tow hook - NWautos

    blog.nwautos.com/.../what_to_do_when_your_car_has_no_tow_hook.ht...
    Mar 13, 2011 - I know most SUVs have a hook on the front or a hitch on the back, but I cannot seem to find anything ... Where can I safely hook up a tow rope?Missing: fiero ‎1987

Dec 17, 2015 | Cars & Trucks

1 Answer

What are the oil pan torque specs on a 1987 Pontiac Fiero GT


To install: Place a 3mm bead of RTV sealant on the oil pan sealing flange.
Install the oil pan and torque the 1 inch bolts to 6-9 ft. lbs. (8-12 Nm) and the 1.5 inch bolts to 14-22 ft. lbs. (19-29 Nm).
Install the starter assembly.
Install the flywheel and clutch housing cover.
Lower the vehicle and refill the crankcase with the specified engine oil.
Start the engine and check for oil leaks.

Mar 12, 2015 | 1987 Pontiac Fiero

1 Answer

87 fiero gt code 12


Code 12 doesn't need fixed. When you begin to test codes you will get the code 12 but that is just telling you that it is in diagnostic mode, it will flash the code 12 three times, then after that it will flash all stored trouble codes. After all stored trouble codes have been displayed, the ECM will repeat the process( so getting code 12 again means you have reached the end of the stored codes list) If it displays code 12 three times and then displays code 12 again , it means you have no problem codes.

Aug 29, 2012 | 1987 Pontiac Fiero

1 Answer

How do i use the diagnostic tool (tools) in my 1987 Pontiac Fiero GT?


Your Fiero uses the OBDI system. Do you have a OBDI scan tool? A OBDII scanner will not work on your car. It is possible to jump across the A and B terminals on the ALDL connector under the dash, using a metal paper clip as a jumper. The trouble codes would appear on the dash as a blinking check engine light. If you wish, I can get the website that has excellent instructions on readidng the flashes to determine the codes.

Jan 29, 2011 | 1987 Pontiac Fiero

1 Answer

I need a firing order diagram for a 1987 pontiac fiero


1987 Pontiac Fiero
2.5 liter L492717859.gif 1987 Pontiac Fiero
2.8 liter V-641894283.gifPlease rate this help.....Notice there is v6 and 4 cyl makesure you get the write one

Nov 30, 2010 | Pontiac Fiero Cars & Trucks

2 Answers

What is the Recommended oil weight for 1987 2.8 v6 fiero


1987 PONTIAC FIERO 2.8L 6-cyl Engine Code [9]
All TEMPS......5W-30 SAE 5W-30 is preferred.

CAPACITIES: Engine, without filter..........3.8 liters, Add extra oil when replacing filter. After
refill check oil level.
Oil Drain Plug.....15-20 ft/lbs

Thank you for using fixya and good luck

Nov 04, 2010 | Pontiac Fiero Cars & Trucks

1 Answer

Just replaced steering column, and turn signals


Do your brake lights work? If not, Check to make sure the brakwiring is connected. Turn signals and brake are electricaly associated. Good Luck, -Ned_

Oct 30, 2009 | 1987 Pontiac Fiero

1 Answer

Spark Plug Gap for 1987 Pontiac Fiero


I believe in that era G.M.had what they called their H.E.I. and it was .060, check on radiator top or in engine compartment or its in the owners manual or better yet call a G.M.. dealer they'll know for sure

Sep 26, 2009 | 1987 Pontiac Fiero

2 Answers

Overheating


if that is dual exhaust and has seperate catylatic converters.... check that the one on that side is not plugged up.

Robert

Sep 10, 2008 | 1987 Pontiac Fiero

Not finding what you are looking for?
Cars & Trucks Logo

1,289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...