Go to daycoproducts.com. Click on car and trucks, then belts, then serpentine belts, then go to the right side of the page and click on "belt routing guide" find your vehcle and get the illistration number. Then, close that page and go to "belt routing illistrations" and find the illistration for your car.
// '); }// ]]>
' +
((i == 0) ? ads_feedback_html : '') +
'' +
'' +
'' +
google_ads[i].line1 +
'' +
'' +
'' +
makeBoldAdWords(google_ads[i].line2) + ' ' +
makeBoldAdWords(google_ads[i].line3) +
'' +
'' +
'' +
google_ads[i].visible_url +
'' +
'' +
'' +
'' +
'Ads by Google' +
'' +
'
' +
'';
}
}
document.write(s);
G_GGL_SKIP += google_ads.length;
return;
}
google_ad_client = "pub-8183356113384228"; // substitute your client_id (pub-#)
google_ad_channel = "4447185069+4169916444+8004387397+9716371454";
google_ad_output = 'js';
google_max_num_ads = '4';
google_ad_type = 'text';
google_feedback = 'on';
if(typeof G_GGL_SKIP == 'undefined')
{
G_GGL_SKIP = 0;
}
google_skip = G_GGL_SKIP;
// -->
google_protectAndRun("render_ads.js::google_render_ad", google_handleError, google_render_ad);
Testimonial: "thank you for your answer very helpful"
Serpentine belt diagram for 2008volvo Roya! ?
SOURCE: i NEED 2005 mazda6 Serpentine Belt Routing
There are 2 engines for your Mazda 6, a 2.3 and a 3.0. Below are both diagrams:
2.3
3.0
SOURCE: need routing diagram for 2000 lincoln town car serpentine belt
There's a diagram at this link.
SOURCE: serpentine belt diagram
The serpentine belt routing should be labeled on your radiator shroud. Look around the engine compartment like the hood or radiator fram suport and there should be a label with the the belt routing.
Good luck and hope this helps
SOURCE: belt routing diagram 98 zx2 2.0
1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Good luck!
SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan
3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt, serpentine
belt, accessory belt, fan belt, engine belt routing diagrams for all types of
car models?
Click the link below: ----
http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.
2,555 views
Usually answered in minutes!
×