On the left side of the driver door you will see a fuse panel. Open it, turn the ignition to on position, press the reset button once, the light will start flashing, Press and hold the reset button till the light goes out. Note also works for the tire pressure light.
Press and hold the reset button on the information ceneter until it goes off.
You can also try turning the ignition to the on position (w/out starting the motor) and press the accelerator pedal to the floor three times in succession. I think this method went out with the 99 or 00 Alero. One of these will work though.
How to Reset the Change Oil Light
After changing the engine oil, the system must be reset.
With the ignition key to ON, push the RESET button
located in the driver's side instrument panel fuse block. The
CHANGE OIL light will start to flash, press and hold the
RESET button again. The reset is complete when you hear
the chimes sound and the CHANGE OIL light goes out.
226 views
Usually answered in minutes!
×