My door wont unlock after my driver side door panel fell off as i was opening the door..heeeelp

Check the child lock. If it does not open from earlier side then inner panel needs to go out snd see what's heppend. Not sure how locks designed on it, it could be that power lock actuator lever snapped from it's place

I suggest that you open your interior door panel and look if the rod that for your locking mechanism is broken or just out of its socket. Start from there, a least you'll be able to what's going on.

Remove the door panel and check to make sure the linkage has not fell off

You may be able to remove the front fender and drive the pins out of the door hinge.

handles may be in good condition but the lever on the latch itself may have came loose. your mostlikley looking at dismantelling the apolsery with the door closed to rectify it.

Hey Kim!

Well, the first question is, and please don't think I am under estimating you on anything, is can you pull up at all on the lock rod? Or, does it feel jammed? Second, yes, the door has to be open to remove the panel because of the bottom pins that hold the panel to the door.

So, let's try and get the door open first.

Sound like to me the plastic clip on your lock actuator has broken Your Rod has fell down in the door

which door wont open and did you try unlocking it with key to see if the latch rod hasnt fell in the door panel if after trying to open normal and still doesnt work you have no choice as to take inside panel off and install the door latch rod if you cant do this without door open get a towing company to unlock the latch with a jimmys kit then you can do what you have to to repair it

You will need to remove the door panel and find out what is broken or loose. Unscrew the arm rest and release the clips that you will find around the outer edge of the interior door panel. Once you have it open, look in the bottom of the door to find any parts that have come loose. You may want to remove the panel on the passenger side so you have an example of how a working one should look.

stay inside