Note the drive belt routing, usually there is a sticker under the hood with the routing. using the right socket and a breaker bar, rotate the drive belt tensioner clockwise to relieve tension. remove belt and slowly release breaker bar tesnsion. for V8, Install on all pulleys except generator, loosen tension and install on generator. for 4.2L install belt over all pulleys except tensioner, relieve tension and install over tensioner, slowly release breaker bar tension.
SOURCE: change a serpentine belt on 04 jeep grand cherokee laredo
Check this link & scroll down to your engine. Click on picture to expand.
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528004328a
SOURCE: how to replace a serpentine belt on a 2004
SOURCE: Change serpentine belt 2004 Hyundai Santa Fe
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
SOURCE: Need a serpentine belt diagram for 2004 Toyota
Sorry for the delayed response.
CLICK on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2004/make/toyota/model/corolla/2004_toyota_corolla_drive_belt_routing_diagram.htm
553 views
Usually answered in minutes!
×