I have a 1990 Toyota Camry DX Wagon 2.0 4 cyl. automatic. I want to change all of the motor/transmission mounts. How many are there? I'm looking to to order parts on-line but there seems to be too many different variations and designs, I don't want to order the wrong mounts or number of mounts. Thanks in advance.
SOURCE: lights 1990 toyota camry dx
wires are pinched or broken by the trunk hinge on the left side of the trunk. you may have to peel back some of the tape to see the damaged wires
SOURCE: Where can I find the vehicle speed sensor on a
THe speed sensor should be mounted somewhere on the Transmission. From what I have found in the past it is mostly located more toward the rear on the lefthand side of the transmission. But should be somewhere on the Tranny.
SOURCE: how to fit a fuel pump to a 1993 toyota camry wagon 4 cyl
You have to remove the gas tank .First lossen the gas cap to remove the pressure. the fuel pump is inside the tank. The tank has two bands that are bolted in place . Siphon out the gas from the tank. The tank will come down . remove the wiring plug from the tank. You can now remove the ring surrounding the fuel pump. Take off the old pump and replace it with the new one. be sure to notice how you took off the electronic plug. reinstall it. Replace the tank and refill it with gas. it should work . you may have to work the fuel pump around to install it.
Testimonial: "great work thanks"
SOURCE: I have a 2006 4 cyl. automatic Camry. Does the
If you havent changed it yet and you have over 50,000 miles, it deffinetly should be changed.
Testimonial: "Thank you so much. Will do. It seemed logical to have it changed but could not find anything in the schedule. Any reason?"
SOURCE: i have installed a new
There is only 1 "set" of timing marks. If there is more than 1 then someone has modified your engine components. Here is a picture of where they should be.
99 views
Usually answered in minutes!
×