Please rate
Item
Part Number
Description
1
6B209
Drive Belt Tensioner
2
2882
A/C Compressor Mounting Bracket
3
19703
A/C Compressor
4
6C348
Accessory Drive Belt Routing Pulley
5
10346
Generator
6
3A733
Power Steering Pump Pulley
7
6312
Crankshaft Pulley
8
8509
Water Pump Pulley
9
—
Bolt
A
—
Tighten to 70-95 Nm (52-70 Lb-Ft)
SOURCE: I need the serpentine belt diagram for a ford
Here are two links to take you to the serpentine belt diagrams... choose your engine type.
V6-24 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S5021
V6--12 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021
SOURCE: serpentine belt replacement
there is usually a tensioner pulley that keeps the belt tight. With the correct size wrench you would turn the pulley either cw or ccw (in turning the bolt in the middle of the pulley it will not loosen the bolt but actually relieve spring tension)to release tension on the belt and then remove the belt. be sure to note how it is routed around all the pulleys so it goes back on correctly. keep in mind i don't know what your car looks like but i have never seen a different procedure. i always buy a chiltons manual when i get a car so i have a handy referance for such jobs
SOURCE: I need a serpentine belt diagram for adodge
Here's your belt diagram.
if it's not correct let me know and I'll get you all the routing diagram for that year ram 1500.
Hope it helps.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
3,707 views
Usually answered in minutes!
×